Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
Munro Pumps
Medium Head Work Horse Pump
MULP3005B3
$3,047.00Self-priming Work Horse. The impeller, diffuser, brackets, and volutes are all made of cast iron. The suction flange includes a flapper style check valve. Motor shaft is a full 1.25" diameter (instead of the typical 56J at .625"). Motor is a NE...5HP 230/460v Learn More -
MP Pumps
FM30 Pump w/ no engine
33156
$4,960.00Flomax 30 are self-priming pumps, pipe size 3" NPT. Pump End Only double seal for mounting to Gasoline engine with a 1.13" diameter shaft. Engine supplied separately.Cast Iron Engine mount Learn More -
MP Pumps
Chemflo 8 316 stainless pump & motor
31925-30-3T
$5,316.30316 SS end suction centrifugal pump close coupled to a 30HP TEFC motor. 3" x 1.5" Flanged connections, center line discharge. Type 21 mechanical seal, FKM elastomers. -
MP Pumps
316 stainless steel centrifugal PEO
31925
$4,100.00Chemflo 8 PUMPAK (PEO) for 213-215TC316 Stainless steel Centrifugal Pump Pump End Only -
MP Pumps
316 stainless steel centrifugal PEO
33211
$4,090.00Chemflo 8 PUMPAK(PEO) for 182-184TC316 Stainless steel Centrifugal Pump Pump End Only -
MP Pumps
316 stainless steel Pedestal pump PEO
31805
$4,590.00Chemflo 8 PUMPAK(PEO) for 143-145TC frame316 Stainless steel Centrifugal Pump Bering pedestal includedPump End Only -
MP Pumps
316SS Centrifugal PEO 5.60"
31755
$3,230.00Chemical pump, PUMPAK (PEO) for 213-215TC motor frame. Chemflo 6.316 Stainless steel Centrifugal Pump. If used in a bio-diesel application a ni-resist seal is needed.
Pump End Only Learn More -
MP Pumps
316SS Centrifugal
35844
$6,390.00Chemical pump, Chemflo 6.316 Stainless steel Centrifugal Pump.
If used in a bio-diesel application a ni-resist seal is needed. EXP motor is also available as a option.
7.5HP 230/460v Learn More -
MP Pumps
316SS Centrifugal PEO 5.93"
31754
$3,230.00Chemical pump, PUMPAK (PEO) for 213-215TC motor frame. Chemflo 6. 316 Stainless steel Centrifugal Pump. If used in a bio-diesel application a ni-resist seal is needed.Pump End Only Learn More -
MP Pumps
316SS Chemflo 6 PEO 6.18"
31661
$2,930.00Chemical pump, PUMPAK (PEO) for 213-215TC motor frame. Chemflo 6. 316 Stainless steel Centrifugal Pump. If used in a bio-diesel application a ni-resist seal is needed.Pump end only Learn More