Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
American Stainless
SS pump & motor
C24623B2T1
$894.12Models SSP & SSPC pumps have a one-piece shell, capable of supporting the pump and motor weight in a vertically mounted position. The internal design also prevents any air from being trapped in the pump case when mounted vertically. These pumps...2HP 115/230V TEFC Learn More -
EBARA Pumps
Ebara pump Stainless
2CDXU70/206S2
$1,352.78Ebara stainless steel pump.High head pump, 2 stage designed for the applications where a on stage centrifugal just can't develop the head or pressure needed for the job. 2 HP, 230v/1 phase TEFC motor.2HP 230V TEFC Learn More -
American Stainless
SS pump & motor
C15217B2T1
$955.10Models SSP & SSPC pumps have a one-piece shell, capable of supporting the pump and motor weight in a vertically mounted position. The internal design also prevents any air from being trapped in the pump case when mounted vertically. These pumps...2HP 115/230V TEFC Learn More -
American Stainless
SS pump & motor
C14622B2T1
$855.55Models SSP & SSPC pumps have a one-piece shell, capable of supporting the pump and motor weight in a vertically mounted position. The internal design also prevents any air from being trapped in the pump case when mounted vertically. These pumps...2HP 115/230V TEFC Learn More -
American Stainless
SS pump & motor
C15017B2T1
$899.02Models SSP & SSPC pumps have a one-piece shell, capable of supporting the pump and motor weight in a vertically mounted position. The internal design also prevents any air from being trapped in the pump case when mounted vertically. These pumps d...2HP 115/230V TEFC Learn More -
MP Pumps
FM5 Pump w/2HP Motor
26550
$2,070.00Flomax 5 are self-priming pumps, pipe size 1.5" NPT. Electric Motor Driven Pump using a Close-Coupled Cast Iron Electric Motor-2 HP2HP 115/230v CI Learn More -
MP Pumps
FM 8 w/ Motor
26555
$2,040.00Flomax 8 are Cast Iron self-priming pumps, pipe size 2" NPT. Electric Motor Driven Pump using a Close-Coupled Electric Motor 2 HP 115/230v2HP 115/230v CI Learn More -
MP Pumps
FM5 Bronze pump 2HP
26603
25% Off Special Price $3,075.00 Regular Price $4,100.00FM5 Bronze pump 2HP
Flomax 5 bronze are self-priming pumps, pipe size 1.5" NPT. Bilge / Saltwater Pump. Pump with standard 115/230v motor.
Motor base shown is a Option, order separately.
2HP 115/230v Learn More -
MP Pumps
Stainless Steel FM 8 w/ 2HP Motor
33818
$4,140.00Flomax 8 are self-priming pumps, pipe size 2" NPT. Electric Motor Driven Pump using a Close-Coupled SS -
Pacer Pumps
Pacer Pump SPRY2EL C2.0C
58-2E4-C2.0C
$1,375.50Pacer Pump. S pump close coupled to a TEFC 115 / 230 /1 phase electric motor. Self priming FRP plastic resists abrasive particles, good for most water transfer applications. See curve E
Pacer S pump 58-12H4 C3.0C close coupled to a TEFC 3hp moto...
2HP 230v Learn More