Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.

Barmesa Pumps

IB1.5-5-2-1 Center Line Discharge

62071062

23% Off Special Price $2,038.96 Regular Price $2,648.00

High head, Center Line Discharge End-Suction Centrifugal Pump. Impeller trims are available, see performance chart.

Commercial duty pumps featuring centerline discharge for easy inline plumbing and retrofit to other OEM pumps often used on chille...

5HP 230v/1 Learn More

Add to Wish List Add to Compare
Barmesa Pumps

5HP High Pressure Pump

62070515

$1,991.00
5HP High head, End-Suction Centrifugal Pump.

Commercial duty pumps featuring all cast iron construction. High pressure / head pump for irrigation.

Applications
- Booster systems
- Water Transfer
- Chilled Water System
- High pressure at moderate ...
5HP 230v/1 Learn More

Add to Wish List Add to Compare
EBARA Pumps

SS 2stage 5hp

A2CDU200/506T1G

$4,541.37

High head pump, 2 stage designed for the applications where a on stage centrifugal just can't develop the head or pressure needed for the job. 5 HP, 1 phase TEFC NEMA motor.

*Note: Model 2CDU is NSF/ANSI 61 Annex G listed

5HP 230V TEFC Learn More

Add to Wish List Add to Compare
MP Pumps

FM 10 w/ 5HP Motor

28604

$4,810.00

Flomax® 10 are self-priming pumps, pipe size 2" NPT. Electric Motor Driven Pump using TEFC Electric Motor 5 HP. Includes base plate.

FLOMAX^® 10 self-priming centrifugal pumps are capable of creating vacuum sufficient to lift liquids from height...

Cast Iron FM10 5HP 230/1phase 2" Learn More

Add to Wish List Add to Compare
Pacer Pumps

SE2FB C5.0C Plastic Self priming pump

58-12F2-C5.0C

$1,652.00

S pump close coupled to a TEFC electric motor. Self priming FRP plastic resists abrasive particles, good for most water, brackish and mild chemical transfer applications. Widely used to transfer and spray de-icing / anti-icing solutions, such a...

5HP 230v/1 Learn More

Add to Wish List Add to Compare
Pacer Pumps

SE2HL C5.0C

58-12H4-C5.0C

$1,870.00

S pump close coupled to a TEFC 5 HP 230V electric motor. Self priming FRP plastic resists abrasive particles, good for most water transfer applications. Widely used to transfer and spray de-icing / anti-icing solutions, such as calcium chloride...

5HP 230v/1 Learn More

Add to Wish List Add to Compare
MP Pumps

FM 15 Stainless Steel w/ motor

37960

$8,530.00

Flomax 15 Stainless Steel pumps are self-priming pumps, pipe size 3" NPT. Electric Motor Pump using Close-Coupled Cast SS pump, close coupled Electric- 5 HP. Trimmed impeller 5.5 inch. See flow curve for same.

American Bureau of Shipping (ABS) a...

5HP 230v/1 SS Learn More

Add to Wish List Add to Compare
EBARA Pumps

SS Pump 5 HP TEFC

A3U-32-160A50T1C

$3,582.73

Stainless Steel Centrifugal Pumps are designed for dependability, performance and rugged continuous duty service under the most severe conditions. These pumps are guaranteed tough, engineered for the professional and built for long-lasting ind...

5HP 230V TEFC Learn More

Add to Wish List Add to Compare