My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 481-490 of 594

Set Descending Direction
per page
  1. Hypro Pumps

    High Head Pump Centrifugal

    CHMCV67

    $3,600.86
    Cast Iron High Head Centrifugal Pumps.

    Designed for continuous high-pressure circulation and transfer of non-flammable liquids, utility, boiler feed, general transfer, filtration, cooling towers, condensate return, marine applications, fountains,...

    3HP 230/1 Cast Iron Learn More
  2. MP Pumps

    FM5 Pump w/ no engine

    21302

    $987.50
    Flomax 5 are self-priming pumps, pipe size 1.5" NPT. Pump end for use with standard engines. Includes CI PUMPAK only. Mounts to standard engine with 3/4" diameter shaft. Not for use with electric motors.
    3/4" shaft pump kit Learn More
  3. Sta-Rite

    J Centrifugal Pump High Head 1-1/2HP

    JHF-51HL

    $1,612.00
    Sta-Rite - JHF: J Centrifugal Pump High Head 1-1/2HP. This booster pump has a heavy-duty cast iron construction with Noryl impeller. Replace Myers CT15
    • Applications: Water systems and sprinkling for homes, farms, car wash and industry
    • Drain ...
    1-1/2HP 115/230v Learn More
  4. Hypro Pumps

    High Head Pump

    CHMCV56

    $3,238.88
    Cast Iron High Head Centrifugal Pumps.

    Designed for continuous high-pressure circulation and transfer of non-flammable liquids, utility, boiler feed, general transfer, filtration, cooling towers, condensate return, marine applications, fountains,...

  5. Sta-Rite

    J Centrifugal Pump High Head 1-1/2HP

    JHF3-51H

    $1,817.00
    This pump has a heavy-duty cast iron construction with Noryl impeller.
    • Applications: Water systems and sprinkling for homes, farms, car wash JHF3-51h-ms1 and industry
    • Drain Port: Provided for easy winterizing
    • Easy Serviceability: Includes r...
  6. Sta-Rite

    J Centrifugal Pump High Head 1HP

    JHE3-63H

    $1,705.00
    This pump has a heavy-duty cast iron construction with Noryl impeller.
    • Applications: Water systems and sprinkling for homes, farms and industry
    • Drain Port: Provided for easy winterizing
    • Easy Serviceability: Includes replaceable wear ring an...
  7. AMT Pumps

    Sprinkler/Booster 3HP

    379D-95

    25% Off Special Price $1,002.47 Regular Price $1,336.63

    AMT Sprinkler/Booster pumps feature Investment Cast 316 SS closed impellers for high efficiency and resistance against erosion caused by abrasive particles. All models self-prime to 20 feet. Single stage models feature a built-in check valve to in...

    3HP 230v/1 TEFC Learn More
  8. Sta-Rite

    J Centrifugal Pump High Head 2-1/2HP

    JHHG3-53H

    $2,687.00
    Centrifugal High Head pump. This pump has a heavy-duty cast iron construction with Noryl impeller. JHHG-53H
    • Applications: Water systems and sprinkling for homes, farms and industry
    • Drain Port: Provided for easy winterizing
    • Easy Serviceabili...
    2-1/2HP 230/460v Noryl impeller Pump Learn More
  9. MP Pumps

    FM 15 w/ engine

    34623

    $2,880.63
    Flomax 15 are self-priming pumps, pipe size 3" NPT. Gas Engine Driven Pump w/ 8HP Honda with recoil start. see flow curve for 3600 RPM
  10. Hypro Pumps

    High Head Pump

    CHMBV453

    $4,804.96
    Bronze High Head Centrifugal Pumps.

    Designed for continuous high-pressure circulation and transfer of non-flammable liquids, utility, boiler feed, general transfer, filtration, cooling towers, condensate return, marine applications, fountains, bo...

View as List Grid

Items 481-490 of 594

Set Descending Direction
per page