Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
AMT Pumps
High Pressure Bronze Centrifugal Pump
489B-97
$1,510.88High Head Centrifugal Pumps. Designed for continuous duty, high pressure, high flow, general service water circulation and transfer (boosting water in high rise apartments, hotels & office buildings, circulation of hot & chilled water, pressure...230/460v 1-1/2HP TEFC Learn More -
Myers Pumps
Frame Mtd. 2 Stage w/ motor
I2CB-20M
$10,420.00Myers I2C, I2CI and I2CS Two-Stage Centrifugal pumps are designed and built for rugged continuous duty service. These high head (to 400 feet) medium capacity (to 140 GPM) are available in standard fitted (I2C), iron & bronze fitted (I2CI) epoxy...
20HP Learn More -
Hypro Pumps
Cast Iron Centrifugal Pedestal Pump
9202C
$1,747.20- Planetary oil bath gear drive
- Pedestal mount, direct drive
- Max. pressure: 170 psi
- Max. speed: 6000 rpm
- Shaft: 5/8" solid
- Port sizes:
- 9202C 1-1/4" NPT inlet, 1" NPT outlet
- Max. fluid temperature: 140ｺF
- Housing: cast iron
- Impeller: glass-fill...
-
AMT Pumps
High Pressure Bronze Centrifugal Pump
4902-97
25% Off Special Price $1,137.94 Regular Price $1,517.25High Head Centrifugal Pumps. Designed for continuous duty, high pressure, high flow, general service water circulation and transfer (boosting water in high rise apartments, hotels & office buildings, circulation of hot & chilled water, pressure...115/230v 1-1/2HP ODP Learn More -
Myers Pumps
Frame Mtd. 2 Stage w/ motor
I2CB-15MT
$11,620.00Myers I2C, I2CI and I2CS Two-Stage Centrifugal pumps are designed and built for rugged continuous duty service. These high head (to 400 feet) medium capacity (to 140 GPM) are available in standard fitted (I2C), iron & bronze fitted (I2CI) epoxy...
-
Hypro Pumps
Cast Iron Centrifugal Pedestal Pump
9203C
$1,772.40- Planetary oil bath gear drive
- Pedestal mount, direct drive
- Max. pressure: 170 psi
- Max. speed: 6000 rpm
- Shaft: 5/8" solid
- Port sizes:
- 9203C 1-1/2" NPT inlet, 1-1/4" NPT outlet
- Max. fluid temperature: 140ｺF
- Housing: cast iron
- Impeller: glass-...
-
AMT Pumps
High Pressure Bronze Centrifugal Pump
489D-97
$1,440.75Bronze High Head Centrifugal Pumps. Obsolete. See alternatives. Designed for continuous duty, high pressure, high flow, general service water circulation and transfer (boosting water in high rise apartments, hotels & office buildings, circulation ...
230/460v 3/4HP TEFC Bronze - OBSOLETE, call or email for alternative assistance. Parts still available. Learn More -
Myers Pumps
Frame Mtd. 2 Stage w/ motor
I2CB-10MT
$10,880.00High pressure centrifugal Pump.
Myers I2C, I2CI and I2CS Two-Stage Centrifugal pumps are designed and built for rugged continuous duty service. These high head (to 400 feet) medium capacity (to 140 GPM) are available in standard fitted (I2C), ... -
Hypro Pumps
Cast Iron Centrifugal Pedestal Pump
9203C-R
$1,798.80- Planetary oil bath gear drive
- Pedestal mount, direct drive
- Max. pressure: 170 psi
- Max. speed: 6000 rpm
- Shaft: 5/8" solid
- Port sizes:
- 9203C-R 1-1/2" NPT inlet, 1-1/4" NPT outlet
- Max. fluid temperature: 140ｺF
- Housing: cast iron
- Impeller: glas...
-
AMT Pumps
Cast Iron SelfPrime
2764-95
20% Off Special Price $873.80 Regular Price $1,092.25AMT IPT Self-priming solids handling pumps is designed for Industrial and Commercial applications requiring high volume liquid transfer, waste water drainage and processing. These pumps feature self-cleaning clog resistant impeller capable of h...230/460v 1-1/2HP ODP Learn More
