Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
AMT Pumps
High Pressure Cast Iron Centrifugal Pump
4893-95
$696.00High Head Centrifugal Pumps. Designed for continuous duty, high pressure, high flow, general service water circulation and transfer (boosting water in high rise apartments, hotels & office buildings, circulation of hot & chilled water, pressure...115/230v 1/2HP ODP Learn More -
Sta-Rite
J Centrifugal Pump Med Head 1/2HP
JMC3-56
This pump has a heavy-duty cast iron construction with Noryl impeller.- Applications: Water systems and sprinkling for homes, farms and industry
- Drain Port: Provided for easy winterizing
- Easy Serviceability: Includes replaceable wear ring and fea...
230/460v Learn More -
Sta-Rite
JB Centrifugal Pump Med Head 1/2HP
JBMC-56S
This pump has a heavy-duty cast iron construction with silicon bronze impeller.- Applications: Water systems and sprinkling for homes, farms and industry
- Drain Port: Provided for easy winterizing
- Easy Serviceability: Includes replaceable wea...
-
Sta-Rite
JB Centrifugal Pump Med Head 1/2HP
JBMC3-56S
This pump has a heavy-duty cast iron construction with silicon bronze impeller.- Applications: Water systems and sprinkling for homes, farms and industry
- Drain Port: Provided for easy winterizing
- Easy Serviceability: Includes replaceable wear rin...
-
MP Pumps
Series 30 w/ motor
22741
$1,390.00Series 30 End Suction Centrifugal Pump uses a close-coupled Cast Iron Electric Motor-0.5 HP, 3-phase, 230/460 V. The pump has 1" NPT suction and 0.75" NPT horizontal or vertical discharge. -
MP Pumps
Series 30 w/ motor
24481
$1,160.00Series 30 End Suction Centrifugal Pump uses a close-coupled Cast Iron Electric Motor-0.5 HP, 3-phase, 230/460 V. The pump has 1" NPT suction and 0.75" NPT horizontal or vertical discharge. -
MP Pumps
MP Centrifugal pump
22852
$1,180.00MP Centrifugal pump. Series 30 End Suction Centrifugal Pump uses a close-coupled Cast Iron Electric Motor-0.5 HP, 3-phase, 230/460 V. The pump has 1" NPT suction and 0.75" NPT horizontal or vertical discharge. MP Centrifugal pump made in MI. -
MP Pumps
Series 30 w/ motor
24189
$960.00Series 30 End Suction Centrifugal Pump uses a close-coupled Cast Iron Electric Motor-0.5 HP, 3-phase, 230/460 V. The pump has 1" NPT suction and 0.75" NPT horizontal or vertical discharge. -
Sta-Rite
Water Booster Pump
HP7C-02
This Booster Pump is the most durable booster pump available. The patented SignaSeal™ floating impeller design minimizes thrust loads allowing for continuous operation without damage to motor bearings, mechanical seal or pump hydraulic componen...115/230v 1/2HP Learn More -
Sta-Rite
J Centrifugal Pump High Head 1/2HP
JHC-61HL
This pump has a heavy-duty cast iron construction with Noryl impeller.- Applications: Water systems and sprinkling for homes, farms and industry
- Drain Port: Provided for easy winterizing
- Easy Serviceability: Includes replaceable wear ring an...