My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 31-40 of 501

Set Descending Direction
per page
  1. MP Pumps

    High Head pump Pumpak HHLF

    36085

    $1,550.00

    Self priming high head centrifugal pump, for close coupled to an electric motor supplied seperately. Auxiliary Fire Control 46 CFR Compliant US Coast Guard. ABS

    • 1 1/2 x 1 1/2" HIGH HEAD
    • For “C” FACE ELECTRIC MOTOR DRIVE 184TC
    • FLOWS - TO 140 G...
    Electric motor pump kit Learn More
  2. MP Pumps

    Series 80 pump pak

    26038

    $1,160.00
    Series 80 End Suction Centrifugal Pump. 1.5" NPT suction and 1.25" NPT vertical or horizontal discharge. Pump kit NO motor. For 145TC
  3. MP Pumps

    FM5 Pump end only

    26082

    $3,140.00
    Flomax 5 are self-priming pumps, pipe size 1.5" NPT. Pump end for use with standard 56C motor. NOT For use with gas engine. Bronze
  4. MP Pumps

    FM5 Bronze pump

    26646

    $3,690.00
    Bronze pump with electric motor for marine and ship board service. Flomax 5 are self-priming pumps, pipe size 1.5" NPT. Pump with standard 56C motor.FLOMAX® 5 self priming centrifugal pumps are capable of creating vacuum sufficient to lift liqu...
    1.5HP 230/460v Learn More
  5. MP Pumps

    Series 80 w/ motor Ex

    26538-1

    $2,599.00
    Series 80 End Suction Centrifugal Pump. 1.5" NPT suction and 1.25" NPT vertical or horizontal discharge. Close-coupled Cast Iron Explosion Proof Electric Motor-2 HP, 3-phase, 230/460 V, 3450 RPM.
    Explosion proof Learn More
  6. MP Pumps

    High Head Bronze pump & Motor

    36194

    $6,960.00
    High Head Pedestal Bronze pump.

    Self priming high head centrifugal pump, motor drive on ship or boat.HHL-FLOMAX “HR” high pressure self-primingpumps meet USCG specifications for auxiliaryfire control

    • 1 1/2 x 1 1/2" HIGH HEAD
    • ABS type appro...
    HHLF 7.5-3 184TC TEFC 6.7imp Learn More
  7. Webtrol

    SS Booster Pump

    M10B26 S-3PH

    $4,591.26
    Webtrol has been building Booster Pumps For over 35 years for various industrial, commercial and agricultural uses and has long been a leader in the Reverse Osmosis and Deionization Industry.Webtrol's commitment to quality is defined in the const...
    3HP 208-230/460V ODP Learn More
  8. Berkeley Pumps

    SSHM-2-3P Sprinkler Turf AG Pump

    B82639

    $3,173.00 $3,173.00 Click for price

    Sprinkler pump Irrigation pump High pressure pump.

    The Berkeley SSHM-2 Self-Priming Pump consistently delivers high pressure performance without priming problems and delays. 4 stage sprinkler pump. Designed for minimal electrical consumption and ...

    230/460v 3-Phase 4-Stage Learn More
  9. MP Pumps

    FM5 Flomax Pump Explosion Proof motor

    22872-1

    $3,330.00

    Flomax 5 are self-priming pumps, pipe size 1.5" NPT. Explosion Proof Electric Motor Driven Cast Iron Pump using a Long-Coupled Cast Iron EXP Motor-3 HP 60HZ, 2HP 50HZ. 

    List of all the EXPlosion Proof Pumps, all fitted with Hazardous duty motors....

  10. Pacer Pumps

    Plastic Corrosion Resistant pump PCE2AL-G.5C

    60-11A4-G.5C

    $765.00

    Plastic Corrosion Resistant Pump 1/2HP 1750RPM.

    PC Horizontal Pump

    All major pump parts are precision molded of tough, corrosion resistant glass-reinforced polyester, polypropylene, Ryton or Noryl thermoplastic. These high strength plastics prov...

    115/230v 1/2 HP Learn More
View as List Grid

Items 31-40 of 501

Set Descending Direction
per page