My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 1-10 of 31

Set Descending Direction
per page
Page
  1. ss centrifugal pump asp

    American Stainless

    Centrifugal pump

    C14311BBT1
    $810.00
    Centrifugal pump, Stainless centrifugal pump. Models SSP & SSPC pumps have a one-piece shell, capable of supporting the pump and motor weight in a vertically mounted position. The internal design also prevents any air from being trapped in the ...
    1/2HP 115/230V TEFC Learn More
    Add to Wish List Add to Compare
  2. Bronze Centrifugal Pump

    AMT Pumps

    Bronze Centrifugal Pump

    368B-97
    $903.00
    Bronze 1/2 HP pump Designed for continuous-duty low pressure OEM, marine, salt water, Industrial / Commercial and General Service applications including circulation, chemical processing, liquid transfer and cooling.

    See Curve B

    replaces obs 36...
    115/230V 1/2HP TEFC Learn More
    Add to Wish List Add to Compare
  3. Webtrol PC33R-T Corrosion Resistant Pumps

    Webtrol

    Corrosion Resistant Pumps

    PC33R-T
    $2,373.35
    • Glass Reinforced Noryl
    • Ability to rotate the discharge in 90 degree increments.
    • 316SS wear ring and impeller hub
    • Close coupled
    1/2HP 115/230V TEFC Learn More
    Add to Wish List Add to Compare
  4. Webtrol PC50RT Corrosion Resistant Pump TEFC motor

    Webtrol

    Corrosion Resistant Pump TEFC motor

    PC50RT
    $2,225.60

    Corrosion resistant Centrifugal Pump. The Webtrol PC Series Centrifugal is built for the professional who is committed to quality and customer satisfaction.The Webtrol PC Series Centrifugal is completely corrosion resistant through the use of 316 ...

    1/2HP 115/230V TEFC Learn More
    Add to Wish List Add to Compare
  5. MP 22852 MP Centrifugal pump

    MP Pumps

    MP Centrifugal pump

    22852
    $1,180.00
    MP Centrifugal pump. Series 30 End Suction Centrifugal Pump uses a close-coupled Cast Iron Electric Motor-0.5 HP, 3-phase, 230/460 V. The pump has 1" NPT suction and 0.75" NPT horizontal or vertical discharge. MP Centrifugal pump made in MI.
    Learn More
    Add to Wish List Add to Compare
  6. MP 24189 Series 30 w/ motor

    MP Pumps

    Series 30 w/ motor

    24189
    $960.00
    Series 30 End Suction Centrifugal Pump uses a close-coupled Cast Iron Electric Motor-0.5 HP, 3-phase, 230/460 V. The pump has 1" NPT suction and 0.75" NPT horizontal or vertical discharge.
    Learn More
    Add to Wish List Add to Compare
  7. Pacer 58-22A4-G.75C Pacer Pump SPRY2AL G.75C

    Pacer Pumps

    SPRY1-1/2AV-G.5C

    58-21A1-G.5
    $780.00
    Pacer S pump close coupled to a TEFC 115/230v 1 phase electric motor. Self priming pump, POLY plastic resists abrasive particles, good for most water transfer applications, fountains, irrigation. Pacer pumps are made in the USA. Pacer pump has ...
    .5HP/1750 Learn More
    Add to Wish List Add to Compare
  8. Finish Thompson AC4STS1V300B015C05 AC4 Chemical Pump

    Finish Thompson Pumps (FTI)

    AC4 Chemical Pump

    AC4STS1E350B065C08
    $1,505.89

    SALE !!Chemical pump stainless steel.

    Rugged, FTI metallic sealed centrifugal AP Series pumps are compact in design, easy to operate and handle, and very economically priced.

    Built from high quality 316 stainless steel the AP Series pumps are av...

    1/2HP 115/230v Learn More
    Add to Wish List Add to Compare
  9. Pacer PCE2CL-D2.0C 60-12C4-D2.0C Plastic Corrosion Resistant

    Pacer Pumps

    Plastic Corrosion Resistant pump PCE2AL-G.5C

    60-11A4-G.5C
    $765.00

    Plastic Corrosion Resistant Pump 1/2HP 1750RPM.

    PC Horizontal Pump

    All major pump parts are precision molded of tough, corrosion resistant glass-reinforced polyester, polypropylene, Ryton or Noryl thermoplastic. These high strength plastics prov...

    115/230v 1/2 HP Learn More
    Add to Wish List Add to Compare
  10. High Volume SS Straight Centrifugal Pump

    AMT Pumps

    High Volume SS Straight Centrifugal Pump

    5475-98
    $702.00

    The AMT line of Stainless Steel Straight Centrifugal pumps is designed for continuous duty high flow and high pressure applications including chemical processing, liquid transfer, cooling, pressure boosting, circulating and applications requiring ...

    1/2Hp 115/230v Learn More
    Add to Wish List Add to Compare
View as List Grid

Items 1-10 of 31

Set Descending Direction
per page
Page
Compare Products
  1. Remove This Item
Compare
Clear All
Shop By
Now Shopping by
  1. Category Mechanical Sealed Pump Remove This Item
  2. Voltage (Range) 110-120/220-240 Remove This Item
  3. Horse Power (HP) 1/2 Remove This Item
  4. Motor TEFC Remove This Item
Clear All
Shopping Options
Category
  1. Cast Iron Pumps 4 items
  2. Center Line Discharge 4 items
  3. Chemical Pumps 11 items
  4. Corrosion Resistant Plastic 3 items
  5. Drainage Dewatering Pumps 5 items
  6. Jet Pumps 1 item
  7. Metal Alloy Pumps 12 items
  8. Non-Metallic Pumps 3 items
  9. Portable Pumps 2 items
  10. Self Priming Pumps 6 items
  11. Slurry Pumps 2 items
  12. Solids Handling Pumps 3 items
  13. Turbine-Regenerative Pumps 2 items
  14. Pool / Utility Pumps 11 items
  15. Water Pumps 9 items
  16. Pond Fountain Pumps 1 item
  17. Back Pullout 13 items
  18. Booster Pumps 13 items
Phase (Ø)
  1. Single (1) 30 items
  2. Three (3) 1 item
inlet size
  1. Less than 1" 9 items
  2. 1" 7 items
  3. 1 ¼" 5 items
  4. 1 ½" 6 items
  5. 2" 1 item
PRICE $
$  -  $