Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
AMT Pumps
High Pressure Stainless Steel Centrifugal Pump
489D-98
$1,262.00AMT 316SS High Head Centrifugal Pumps. Designed for continuous duty, high pressure, high flow, general chemical / solvent service. Series 48 inlet & outlet are 1.25" & 1" while series 49 is 1.50" & 1.25 respectively. See Curve "A"
Optional Silico...
230/460v 3/4HP TEFC Learn More -
AMT Pumps
Cast Iron Self Priming
282F-95
25% Off Special Price $670.50 Regular Price $894.00AMT Self-priming Centrifugal pumps is designed for Industrial and Commercial applications requiring high volume liquid transfer, waste water drainage and processing. These pumps feature self-cleaning clog resistant impeller capable of handling up ...
230/460v 3/4HP TEFC Learn More -
American Stainless
SS pump & motor
C14315BCT3
$793.64asp american stainless electric pump 304ss. Models SSP & SSPC pumps have a one-piece shell, capable of supporting the pump and motor weight in a vertically mounted position. The internal design also prevents any air from being trapped in the ...3/4HP 230/460V TEFC Learn More -
EBARA Pumps
Stainless Steel Centrifugal Pump
ACDU70/17T3G
$1,098.88The Stainless Steel Series Centrifugal Pumps are designed for dependability, performance and rugged continuous duty service under the most severe conditions. These pumps are guaranteed tough, engineered for the professional and built for long-...3/4HP 230/460V TEFC Learn More -
American Stainless
SS pump & motor
C14315BCD3
$701.73Models SSP & SSPC pumps have a one-piece shell, capable of supporting the pump and motor weight in a vertically mounted position. The internal design also prevents any air from being trapped in the pump case when mounted vertically. These pumps...3/4HP 230/460V ODP Learn More -
AMT Pumps
SelfPrime Stainless steel
3892-98
20% Off Special Price $1,508.80 Regular Price $1,886.003/4HP AMT Self-Priming Stainless steel Centrifugal pumps are designed for a wide range of applications including chemical processes, Perchlor / Trichlor solvents, waste water treatment and pumping agriculture fertilizers / fumigants. All models...230/460v 3/4HP Learn More -
AMT Pumps
Stainless Steel Centrifugal Pump
370C-98
20% Off Special Price $726.40 Regular Price $908.00Designed for continuous-duty low pressure OEM, Industrial/Commercial and General Service applications including circulation, chemical processing, liquid transfer and cooling. Bodth single & three phase ODP or TEFC motors available up to 2HP. ...230/460v 3/4HP TEFC Learn More -
American Stainless
SS pump & motor
C14315BCT3-2
$763.83Models SSP & SSPC pumps have a one-piece shell, capable of supporting the pump and motor weight in a vertically mounted position. The internal design also prevents any air from being trapped in the pump case when mounted vertically. These pumps d...3/4HP 230/460V TEFC Learn More -
American Stainless
SS horizontal pump with 3/4 hp motor.
S14317BCT3
$679.37Models SSP & SSPC pumps have a one-piece shell, capable of supporting the pump and motor weight in a vertically mounted position. The internal design also prevents any air from being trapped in the pump case when mounted vertically. These pumps d...3/4HP 230/460V TEFC Learn More -
MP Pumps
Series 30 w/ motor
25457
$1,320.00Series 30 End Suction Centrifugal Pump uses a close-coupled Cast Iron Electric Motor-0.75 HP, 3-phase, 230/460 V. The pump has 1" NPT suction and 0.75" NPT horizontal or vertical discharge.