My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 11-20 of 44

Set Descending Direction
per page
  1. AMT Pumps

    Explosion Proof Electric Trash pump 5HP

    393A-X5

    $3,526.00

    5HP Electric trash pump. AMT Cast Iron Trash pumps are designed for a trouble free and economical handling of solid-laden liquids and slurries. Pumps are available in three NPT port sizes; 2", 3" and 4". Cast iron construction with 2 vane Stainles...

    230/460v 3P 2" Explosion proof Learn More
  2. MP Pumps

    FM 8 w/ Motor

    22849

    $3,700.00
    Flomax 8 are self-priming Cast Iron pumps, pipe size 2" NPT. Electric Motor Driven Pump using a Coupled Electric Motor-5 HP
    5HP 230/460v Cast Iron Learn More
  3. MP Pumps

    Series 200 pump

    22737

    $2,970.00
    Centrifugal pump, motor driven centrifugal pump. End suction centrifugal pump made from rugged cast iron with a cast impeller. Impellers are dynamically balanced to improve efficiency and bearing life.Discharge can be vertical or horizontal. ...
    5HP 230/460v Learn More
  4. MP Pumps

    FM 10 w/ 5HP Motor

    24389

    $3,748.00

    Flomax® 10 are self-priming pumps, pipe size 2" NPT. Electric Motor Driven Pump using TEFC Electric Motor 5 HP.  Includes base plate.

    FLOMAX® 10 self-priming centrifugal pumps are capable of creating vacuum sufficient to lift liquids from heights...

    Cast Iron 5HP 230/3phase 2" Learn More
  5. Berkeley Pumps

    B1-1/2TPMS High Pressure Water Pump

    B58084

    $5,558.00 $5,558.00 Click for price
    High Pressure, End suction centrifugal pump, close coupled 3-phase motor with mechanical seal. Water pump for irrigation, water transfer, industrial applications. Berkeley water pumps are a industry leader for transfer, sprinkler, chiller, proces...
    5HP 230/460V ODP Learn More
  6. Pacer Pumps

    SE3LB D5.0C

    58-13L2-D5.0C

    $1,592.00

    3" S pump close coupled to a TEFC 3P electric motor. Self priming FRP polyester plastic resists abrasive particles, good for most water, salt water, waste water, mild acids and bases transfer applications. Widely used to transfer and spray de-icin...

    3" 5HP/3ph Learn More
  7. AMT Pumps

    Electric Trash pump 5HP

    393A-95

    $2,381.00

    5HP Electric trash pump. AMT Cast Iron Trash pumps are designed for a trouble free and economical handling of solid-laden liquids and slurries. Pumps are available in three NPT port sizes; 2", 3" and 4". Cast iron construction with 2 vane Stainles...

    230/460v 3P 2" Learn More
  8. AMT Pumps

    Sprinkler Booster pump

    3655-95

    25% Off Special Price $1,478.25 Regular Price $1,971.00

    Sprinkler pump 5HP Booster pumps feature Investment Cast 316 SS closed impellers for high efficiency and resistance against erosion caused by abrasive particles. Sprinkler pumps self-prime to 20 feet. Single stage feature a built-in check valve to...

    5HP 230/460v ODP Learn More
  9. Myers Pumps

    Frame Mtd. 2 Stage w/ motor

    I2CIB-5M

    $9,130.00

    Myers I2C, I2CI and I2CS Two-Stage Centrifugal pumps are designed and built for rugged continuous duty service. These high head (to 400 feet) medium capacity (to 140 GPM) are available in standard fitted (I2C), iron & bronze fitted (I2CI) epoxy c...

  10. Myers Pumps

    Frame Mtd. 2 Stage w/ motor

    I2CB-5M

    $9,130.00

    Myers I2C, I2CI and I2CS Two-Stage Centrifugal pumps are designed and built for rugged continuous duty service. These high head (to 400 feet) medium capacity (to 140 GPM) are available in standard fitted (I2C), iron & bronze fitted (I2CI) epoxy...

View as List Grid

Items 11-20 of 44

Set Descending Direction
per page