Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
AMT Pumps
SS AMT Centrifugal pump
2828-98
20% Off Special Price $1,695.20 Regular Price $2,119.00Stainless Steel SS AMT Self-priming semi-trash Centrifugal pumps are designed for Industrial and Commercial applications requiring high volume liquid transfer, waste water drainage and processing. These pumps feature self-cleaning clog resistan...115/230v 2HP ODP 1.5" Learn More -
AMT Pumps
CI Centrifugal
282C-95
23% Off Special Price $726.11 Regular Price $943.00This line of AMT Self-priming Solids Handling pumps is designed for Industrial and Commercial applications requiring high volume liquid transfer, waste water drainage and processing.
These pumps feature self-cleaning clog resistant impeller capab...
115/230v 1HP TEFC Learn More -
AMT Pumps
Cast Iron Self Priming
282F-95
25% Off Special Price $670.50 Regular Price $894.00AMT Self-priming Centrifugal pumps is designed for Industrial and Commercial applications requiring high volume liquid transfer, waste water drainage and processing. These pumps feature self-cleaning clog resistant impeller capable of handling up ...
230/460v 3/4HP TEFC Learn More -
Sta-Rite
J Centrifugal Pump Med Head 1-1/2HP
JMF-40L
This pump has a heavy-duty cast iron construction with Noryl impeller.- Applications: Water systems and sprinkling for homes, farms and industry
- Drain Port: Provided for easy winterizing
- Easy Serviceability: Includes replaceable wear ring an...
115/230v Learn More -
Sta-Rite
J Centrifugal Pump High Head 2HP
JHG-52HL
Sta-Rite - JHG: J Centrifugal Pump High Head 2HP. This pump has a heavy-duty cast iron construction with Noryl impeller. Replace Myers CT20- Applications: Water systems and sprinkling for homes, farms and industry
- Drain Port: Provided for eas...
-
Sta-Rite
J Centrifugal Pump Med Head 1HP
JME3-58
This pump has a heavy-duty cast iron construction with Noryl impeller.- Applications: Water systems and sprinkling for homes, farms and industry
- Drain Port: Provided for easy winterizing
- Easy Serviceability: Includes replaceable wear ring and fea...
230/460v Learn More -
Sta-Rite
J Centrifugal Pump Med Head 2HP
JMG3-41
This pump has a heavy-duty cast iron construction with Noryl impeller.- Applications: Water systems and sprinkling for homes, farms and industry
- Drain Port: Provided for easy winterizing
- Easy Serviceability: Includes replaceable wear ring and fea...
230/460v Learn More -
Sta-Rite
JB Centrifugal Pump High Head 2HP
JBHG-52S
This pump has a heavy-duty cast iron construction with silicon bronze impeller.- Applications: Water systems and sprinkling for homes, farms and industry
- Drain Port: Provided for easy winterizing
- Easy Serviceability: Includes replaceable wear rin...
-
MP Pumps
FM5 pump pak Engine mount
21300
$1,340.00Flomax Pumps 5 are self-priming pumps, pipe size 1.5" NPT. Pump end for use with standard engines. For use with 3/4" crankshaft. PumpPackPump kit, Aluminum Learn More -
MP Pumps
FM5 Pump w/ no engine
21301
$2,830.00Flomax 5 are self-priming pumps, pipe size 1.5" NPT. Pump end for use with standard engines. For use with pump engine. BronzeBronze, Engine mount kit Learn More