Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
MP Pumps
FM 8 w/ Motor
26555
$2,040.00Flomax 8 are Cast Iron self-priming pumps, pipe size 2" NPT. Electric Motor Driven Pump using a Close-Coupled Electric Motor 2 HP 115/230v2HP 115/230v CI Learn More -
MP Pumps
FM8 w/ Motor
30935
$2,140.00FM8 Flomax 8 are self-priming pumps,
MP cast iron pump has pipe size 2" NPT. Electric Motor Driven Pump Cast Iron using a Close-Coupled Electric Motor-3 HP
3HP 230v/1 CI Learn More -
MP Pumps
FM 8 w/ 3HP Motor
22870
$3,470.00Flomax 8 are self-priming Cast Iron pumps, pipe size 2" NPT. Electric Motor Driven Pump using a Coupled Electric Motor-3 HPCI 3HP 230/460v TEFC Learn More -
MP Pumps
FM 8 w/ Motor
22849
$3,700.00Flomax 8 are self-priming Cast Iron pumps, pipe size 2" NPT. Electric Motor Driven Pump using a Coupled Electric Motor-5 HP5HP 230/460v Cast Iron Learn More -
MP Pumps
FloMax 10 Pump w/ Motor
22722
$3,750.00Cast Iron Flomax 10 are self-priming pumps, pipe size 2" NPT. Electric Motor Driven Pump using Close-Coupled Cast Iron Electric Motor-7.5 HP7.5HP 230/460v Learn More -
MP Pumps
FM 8 w/ Motor 1725
33466
$1,310.00Flomax 8 are self-priming pumps, pipe size 2" NPT. Electric Motor Driven Pump using a Close-Coupled Cast Iron Electric Motor-1 HP1HP 230/460v 1725RPM CI Learn More -
MP Pumps
FM 8 w/ Engine
29635
$2,010.00Flomax 8 are self-priming pumps, pipe size 2" NPT. Gas Engine Driven w/ 5 HP Honda5HP Honda Learn More -
MP Pumps
FM 15 Bronze Pump End Only
21371
$6,410.00Flomax 15 are self-priming pumps, pipe size 3" NPT. Gas Engine Driven Pump end only PEO for use with a 1" diameter crankshaft. For mounting to a gas engine. Also available in pedestal mount or for NEMA JM motor mounts. See other models. See fl... -
AMT Pumps
Dredge Pump - Pedestal
316F-99
23% Off Special Price $1,102.64 Regular Price $1,432.00No engine, Pedestal 3/4" keyed shaft for customer mount driver.- High Chromium Stainless Steel Internal Components Resist Wear from Sea Water Mixed with Abrasive Sand
- Silicon Carbide Mechanical Seal Resists Abrasives and Extends Seal Life
- H...
Pedestal Mount w/ 3/4" Keyed Shaft Learn More -
MP Pumps
Flomax 8 Pedestal pump
21339
$1,020.00Flomax 8 pumps are self-priming pumps, pipe size 2" NPT. CI pump mounted to a CI bearing pedestal which has a 3/4" diameter shaft. Right hand rotation.Pedestal mounted CI 5" imp. Learn More