Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
AMT Pumps
3" CI Self-Prime pump
2875-95
23% Off Special Price $1,617.77 Regular Price $2,101.00AMT self-priming pumps are designed for a broad range of high capacity applications. The Centerline discharge is specifically designed to prevent vapor binding and makes for more convenient piping connections.Self-cleaning semi-open stainless...
5HP 230/460v Learn More -
Pacer Pumps
SE3LB D5.0C
58-13L2-D5.0C
$1,592.003" S pump close coupled to a TEFC 3P electric motor. Self priming FRP polyester plastic resists abrasive particles, good for most water, salt water, waste water, mild acids and bases transfer applications. Widely used to transfer and spray de-icin...
3" 5HP/3ph Learn More -
MP Pumps
FM 15 w/ motor
24395
$3,440.00Flomax 15 are self-priming pumps, pipe size 3" NPT. Electric Motor Pump using Close-Coupled Cast Iron Electric- 5 HP. Trimmed impeller 5.5 inch. See flow curve for same.5HP 230/460v CI Learn More -
Munro Pumps
Medium Head Work Horse Pump
MULP3005B3
$3,047.00Self-priming Work Horse. The impeller, diffuser, brackets, and volutes are all made of cast iron. The suction flange includes a flapper style check valve. Motor shaft is a full 1.25" diameter (instead of the typical 56J at .625"). Motor is a NE...5HP 230/460v Learn More