Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
Sta-Rite
J Centrifugal Pump Med Head 1HP
JME3-58
This pump has a heavy-duty cast iron construction with Noryl impeller.- Applications: Water systems and sprinkling for homes, farms and industry
- Drain Port: Provided for easy winterizing
- Easy Serviceability: Includes replaceable wear ring and fea...
230/460v Learn More -
Sta-Rite
JB Centrifugal Pump High Head 1HP
JBHE3-63S
This pump has a heavy-duty cast iron construction with silicon bronze impeller.- Applications: Water systems and sprinkling for homes, farms and industry
- Drain Port: Provided for easy winterizing
- Easy Serviceability: Includes replaceable wear rin...
-
MP Pumps
Series 60 w/ motor
27675
$1,700.00MP Series 60 End Suction Centrifugal Pump. 1.25" NPT suction and 1" NPT horizontal/vertical discharge. Electric Motor Driven Pump using a Close-Coupled Cast Iron Electric Motor - 1 HP, 3-phase, 230/460 V, 3450 RPM. The pumps are right hand rota...1HP 230/460v TEFC Learn More -
MP Pumps
Series 30 w/ motor
22839
$1,030.00Series 30 End Suction Centrifugal Pump uses a close-coupled Cast Iron Electric Motor-1 HP, 3-phase, 230/460 V. The pump has 1" NPT suction and 0.75" NPT horizontal or vertical discharge. -
MP Pumps
Series 110 w/ motor
26545
$1,500.00Series 110 End Suction Centrifugal Pump. 1.5" NPT suction and 1.25" NPT vertical or horizontal discharge. Close-coupled Cast Iron Electric Motor-1HP, 3450 RPM. -
MP Pumps
FM 8 w/ Motor 1725
33466
$1,310.00Flomax 8 are self-priming pumps, pipe size 2" NPT. Electric Motor Driven Pump using a Close-Coupled Cast Iron Electric Motor-1 HP1HP 230/460v 1725RPM CI Learn More -
AMT Pumps
High Pressure Cast Iron Centrifugal Pump
489F-95
$768.00High pressure - head Centrifugal Pump. Designed for continuous duty, high pressure, high flow, general service water circulation and transfer (boosting water in high rise apartments, hotels & office buildings, circulation of hot & chilled water...1HP 3-Phase TEFC motor Learn More -
AMT Pumps
Sprinkler Booster 1HP
379F-95
$939.001HP 3-phase AMT Sprinkler Booster pumps feature Investment Cast 316 SS closed impellers for high efficiency and resistance against erosion caused by abrasive particles. All models self-prime to 20 feet. Single stage models feature a built-in check...
1 HP 230/460v TEFC Learn More -
AMT Pumps
Self Priming Centrifugal Pump 1HP
285J-95
20% Off Special Price $692.80 Regular Price $866.001 HP Self-priming cast iron pump for clean or dirty water circulating, liquid transfer, coolant and dewatering applications. Self-cleaning, clog resistant impeller. Built in flapper/check valve. Handle & steel case. For a 12v model see -12 version...
1HP 230/460v/3 TEFC Learn More -
Myers Pumps
High Pressure Centrifugal Pump
CT103
$900.00The Myers CT Series of centrifugal pumps are designed to meet your toughest pumping requirements. Rugged cast iron construction can be coupled with either a corrosion resistant composite, or a lead-free brass impeller. Versatile design features...1hp 230/460v Learn More