My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 1-10 of 34

Set Descending Direction
per page
Page
  1. Finish Thompson Pumps (FTI)

    FTI DB5.5P Magnetic pump Polypro

    DB5.5P-M233

    $829.19
    Magnetic coupled pump.
    • Five-year warranty
    • Extended run dry ability (with carbon bushing)
    • High operating efficiency —Up to 70%
    • Polypropylene construction
    • Powerful neodymium magnets
    • Close-coupled design
    • Horizontal or vertical installation w...
    1/4 Hp 115V, TEFC Learn More
  2. Finish Thompson Pumps (FTI)

    FTI DB5.5 Magnetic coupled pump Polypro

    DB5.5P-M226

    $905.98
    Magnetic coupled pump.
    • Five-year warranty
    • Extended run dry ability (with carbon bushing)
    • High operating efficiency —Up to 70%
    • Polypropylene construction
    • Powerful neodymium magnets
    • Close-coupled design
    • Horizontal or vertical installation w...
    1/2 Hp 115V, 60 Hz TEFC Learn More
  3. Finish Thompson Pumps (FTI)

    DB5.5V-M613 pump Kynar

    DB5.5V-M233

    $961.63
    Magnetic coupled pump all Kynar PVDF for extreme chemical resistance.
    • Five-year warranty
    • Extended run dry ability (with carbon bushing)
    • High operating efficiency —Up to 70%
    • Polypropylene construction
    • Powerful neodymium magnets
    • Close-couple...
    1/4 Hp 115V, TEFC, Kynar Learn More
  4. Flotec Pumps

    Stainless Steel Sprinkler Utility Pump

    2825SS-01

    $349.00
    Features:
    • Stainless Steel Pump Housing
    • Continuous duty rated 1 HP, 115 Volt motor , 3,450 RPM
    • Permanently lubricated Bearings mean no maintenance problems
    • Completely portable; pump mounted on stand with handle
    • Factory installed 6' power cord wit...
    Simer sprinkler pump Learn More
  5. Pedrollo Pumps

    Centrifugal End Suction pump

    CPX05A16S

    $307.97
    Currently out of stock, see Pearl pumps......Pedrollo centrifugal pump for clean water . They are recommended for pumping clean water and liquids that are chemically non aggressive to the materials from which the pump is made. RELIABLE AND MAIN...
    1/2HP 115v Learn More
  6. Pedrollo Pumps

    Turbine pump 3/4HP

    PQ07A16S

    $431.57
    Turbine pump.

    They are recommended for pumping clean water without abrasive particles and liquids that are chemically non aggressive to the materials from which the pump is made. FOR THEIR RELIABILITY, SIMPLICITY OF USE AND ECONOMY. THEY ARE SUIT...

    115v/1 Learn More
  7. Pedrollo Pumps

    Centrifugal End Suction pump

    PNGA07A16S

    $1,440.97
    Pedrollo centrifugal pump for clean water . They are recommended for pumping water and liquids that are chemicals but non aggressive to the materials from which the pump is made. RELIABLE AND MAINTENANCE FREE THEY ARE WIDELY USED IN THE DOMESTIC ...
    3/4HP 115v Learn More
  8. Pearl Calpeda Pumps

    High Head Centrifugal pump

    NM1A03A16S

    $329.60
    Pearl Calpeda centrifugal pump NM1A 03A16S for clean water, high pressure. They are recommended for pumping clean water and liquids that are chemically non aggressive to the materials from which the pump is made.

    RELIABLE AND MAINTENANCE FREE THE...

    1/3HP 115v Learn More
  9. calpeda ct65 pump
    Sale

    Calpeda Pumps

    Clear water pump 1/2HP

    CT65 05A16S

    41% Off Special Price $394.00 Regular Price $672.00

    Calpeda Pump 1/2hp: Turbine pump for clean liquids, Clear water pump, without abrasives, without suspended solids, non-explosive, non-aggressive for the pump materials. Heavy duty Peripheral pump. Works with high pressure soaker drip hoses irrigat...

    1/2HP 1" 115v/1 Learn More
  10. Pedrollo Pumps

    Aggressive Liquid Turbine pump

    PQA05A16S

    $513.97
    Aggressive Liquid Turbine pump. Peripheral pump with Ryton chemical resistant plastic body.

    They are recommended for pumping clean water without abrasive particles and liquids that are chemically non aggressive to the materials from which the pum...

    1/2HP 115v Learn More
View as List Grid

Items 1-10 of 34

Set Descending Direction
per page
Page