My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 31-40 of 57

Set Descending Direction
per page
  1. Pacer Pumps

    SE2EL D2.0C Self priming pump

    58-12E2L-D2.0C

    $869.00
    Pacer Pump Electric motor pump. Self priming pump close coupled to a TEFC 230 / 460 3 phase electric motor. Self priming FRP plastic resists abrasive particles, good for most water transfer applications.

    Often uses on liquid de-icing and pre-wet ...

  2. RS Corcoran

    316SS 2HP Pump

    2000D-AA

    $4,323.80
    316 Stainless Steel End suction Pump. 2HP 230/460/3 motor, FKM seals. 2000 Series ideal for many O.E.M and chemical processing applications. Applications are pumping cleaners, caustic materials, salt solutions, chlorinated solvents, photographi...
    2HP 230/460v TEFC Learn More
  3. AMT Pumps

    Sprinkler / Booster 2HP

    379C-95

    23% Off Special Price $814.66 Regular Price $1,058.00

    Sprinkler/Booster pumps by AMT feature Investment Cast 316 SS closed impellers for high efficiency and resistance against erosion caused by abrasive particles. All models self-prime to 20 feet. Single stage models feature a built-in check valve to...

    2HP 115/230v/1 TEFC Learn More
  4. Hypro Pumps

    316SS pump 2HP

    COMSV563T

    $1,490.48

    2hp 230/460v three phase motor, 316 SS cast end-suction centrifugal pump.

    FEATURES: Open (semi) impellers Passivated and electropolished 

    Drain plug 

    This series of low pressure general transfer pumps are also available in Cast Iron and Bronze ...

    2HP 230/460v TEFC Learn More
  5. Hypro Pumps

    Corrosion Resistant PolyPro Pump

    CHMPP563T

    $1,315.74
    Corrosion Resistant Polypropylene Centrifugal pumps. Close coupled to a NEMA 56J electric motor. Great for plating solutions, fume scrubbers, chillers, ponds, fountains and waste treatment, parts washers, chemical transfer, pools, spas, solvent r...
  6. Hypro Pumps

    Corrosion Resistant PolyPro Pump

    CHMPP56T

    $1,325.00
    Corrosion Resistant Polypropylene Centrifugal pumps. Close coupled to a NEMA 56J electric motor. Great for plating solutions, fume scrubbers, chillers, ponds, fountains and waste treatment, parts washers, chemical transfer, pools, spas, solvent r...
  7. EBARA Pumps

    Stainless Steel Centrifugal Pump

    ACDU70/5B20T3C

    $1,356.03
    The Stainless Steel Series Centrifugal Pumps are designed for dependability, performance and rugged continuous duty service under the most severe conditions. These pumps are guaranteed tough, engineered for the professional and built for long-...
    2HP 230/460V TEFC Learn More
  8. EBARA Pumps

    Stainless Steel Centrifugal Pump

    ACDU70/5B20T1C

    $1,638.41

    Ebara ACDU Stainless Steel Series Centrifugal Pumps are NSF certified and designed for dependability, performance and rugged continuous duty service under the most severe conditions. These pumps are guaranteed tough, engineered for the professiona...

    2HP 230V TEFC Learn More
  9. American Stainless

    Close coupled pump/mtr 2HP 1ph

    C15418B2T1

    $855.55
    Brine Maker de-icing solution is a common application. Replaces NPO pumps. Models SSP & SSPC pumps have a one-piece shell, capable of supporting the pump and motor weight in a vertically mounted position. The internal design also prevents any a...
    2HP 115/230V TEFC Learn More
  10. Finish Thompson Pumps (FTI)

    AC5 Horizontal Centrifugal Pump

    AC5STS1V450B015C23

    $1,725.68

    Rugged, metallic sealed centrifugal AP Series pumps are compact in design, easy to operate and handle, and very economically priced.

    Built from high quality 316 stainless steel the AP Series pumps are available in both horizontal or vertical desi...

View as List Grid

Items 31-40 of 57

Set Descending Direction
per page