316SS 2HP Pump
-
Manufacturer:
-
Series :
-
Product Name:316SS 2HP Pump
-
Model Number:2000D-AA
2HP 230/460v TEFC
316 Stainless Steel End suction Pump. 2HP 230/460/3 motor, FKM
seals. 2000 Series ideal for many O.E.M and chemical processing
applications. Applications are pumping cleaners, caustic materials,
salt solutions, chlorinated solvents, photographic chemicaals,
de-ionized water, fatty acids or phoshoric, citric and lactic
acids. End Suction - Horizontal mechanical sealed 316 SS, Carpenter
20Cb3, Hastelloy B & C pumps. Normally made from wrought metal
that is uniformly dense and essentially porosity free. The use of
wrought metal in pumps often offers other advantages over cast
alloys. Two obvious advantages are hlgher density and better
mechanical properties. In many instances the wrought metal has
significantly higher corrosion-resistance than cast metal of
similar composition.
Sizes from 3/4 x 1/2" to 2 x 1-1/2".
Model Number | 2000D-AA |
---|---|
Series | 2000D Hazardous Location 316SS Centrifugal Pumps |
Max Flow (GPM.) | 110 |
Max Flow GPH | 6600 |
TDH Maximum (Ft) | 81 |
TDH Maximum (PSI) | 35 |
TDH BEP (FT.) | 60.000000 |
Horse Power (HP) | 2 |
Horsepower (IE .5, 1, 1.5, 20) | 2.0000 |
Inlet Connection Type | FNPT |
inlet size | 1 ½" |
Inlet (In.) | 1.5 |
Outlet Connection Type | FNPT |
Outlet (In.) | 1 |
Wetted Materials | 316SS |
Elastomers / O-ring | FKM |
Voltage (V) | 208-230/460 |
Voltage (Range) | 208-240/460 |
Phase (Ø) | Three (3) |
Motor Frequency | 50/60 |
Motor | TEFC |
Speed (RPM.) | 3450 |
Motor Frame | 143/5TC |
Self Priming | Yes |
Max Operating Temperature (F) | 200 |
Viscosity | Milk 3.20 cp 40.00 ssu |
Shaft | 316SS |
Length (In.) | 15.300000 |
Mechanical Seal | No |
Mechanical Seal Face | Carbon-ceramic |
Mechanical Seal Type | Single |
Motor Bearings | Ball |
Impeller Size (IN.) | 4.440000 |
Other | CCW rotation pump end. |
Duty | Continuous |
Drain | Yes |
Port Rotation | Yes |
Country of Manufacture | United States |
Weight (Lbs) | 45.000000 |
Warranty (YRS.) | 1 |
>