Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
March Pumps
magdrive pump Ryton March 6
TE-6T-MD 1PH 1/2HP
15% Off Special Price $939.25 Regular Price $1,105.00Magdrive pump March 6, Ryton
Centrifugal Horizontal Magnetic Coupled Pump .5 Hp. TE-6T-MD-1P-1/2HP Magnetic coupled pumps are seal-less, providing for maintenance-free and leak-proof operation. The magnetic coupling acts as a clutch to provide ov...
115/230v 1/2HP Ryton Learn More -
MP Pumps
MP Centrifugal pump
22852
$1,180.00MP Centrifugal pump. Series 30 End Suction Centrifugal Pump uses a close-coupled Cast Iron Electric Motor-0.5 HP, 3-phase, 230/460 V. The pump has 1" NPT suction and 0.75" NPT horizontal or vertical discharge. MP Centrifugal pump made in MI. -
MP Pumps
Series 30 w/ motor
24189
$960.00Series 30 End Suction Centrifugal Pump uses a close-coupled Cast Iron Electric Motor-0.5 HP, 3-phase, 230/460 V. The pump has 1" NPT suction and 0.75" NPT horizontal or vertical discharge. -
AMT Pumps
Self Priming Centrifugal Pump
285E-95
23% Off Special Price $571.34 Regular Price $742.00Self-priming centrifugal pump for circulating, liquid transfer and dewatering applications. Self-cleaning, clog resistant impeller. Light WVO, vegi oil, biodiesel. Used in a Biodiesel Processor application where it's pumping oil through it & sm...1/2HP 115/230v TEFC Learn More -
Serfilco
1x3/4MRGR-C.5
44-4101
$1,097.36Centrifugal Horizontal Magnetic Coupled Pump .5 Hp. Series D magnetic coupled pumps are seal-less, providing for maintenance-free and leak-proof operation. The magnetic coupling acts as a clutch to provide overload protection. The broad range of ...1/2HP 115/230V TEFC Learn More -
March Pumps
PVDF magdrive 1/2 hp
TE-6K-MD 1PH 1/2HP
15% Off Special Price $856.80 Regular Price $1,008.00PVDF Magdrive 1/2HP pump.
March Centrifugal Horizontal Magdrive Pump .5 Hp. Magnetic coupled pumps are seal-less, providing for maintenance-free and leak-proof operation. The magnetic coupling acts as a clutch to provide overload protection. The ...
115/230v March series 6 Learn More -
Flotec Pumps
CI Shallow well Pump 1/2
FP4105
$446.02Cast Iron shallow well jet pump water pump. 1/2 HPShallow Well Pump, Motor Enclosure TEFC, Pump Material Cast Iron, 1/2 HP, Voltage 115/230, Suction Lift 25 Ft., Max. Case Pressure 145 PSI, Shut Off 63 PSI, Motor Type Capacitor Start, Max. Oper... -
Little Giant Pumps
TE-6-MD-CK
586600
$1,890.06The Little Giant MD-CK series features leakproof, seal-less magnetic drives and are designed for in-line, non submersible use. Volute, magnet housing and impeller are carbon-filled Kynar for excellent chemical resistance. Ceramic shaft and thrust... -
Little Giant Pumps
TE-6-MD-HC
586604
$1,504.20The Little Giant MD-HC series features leakproof, seal-less magnetic drives and are designed for in-line, non submersible use.Volute, magnet housing and impeller are glass-filled Ryton for excellent chemical resistance. Ceramic shaft and thrust w... -
Little Giant Pumps
TE-6-MD-SC
586504
$1,451.06The Little Giant MD-SC series features leakproof, seal-less magnetic drives and are designed for in-line, non submersible use. Volute and impeller are glass-filled polypropylene for excellent chemical resistance. Ceramic shaft and thrust washers ...