My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 61-70 of 372

Set Descending Direction
per page
Page
  1. MP 21371 FM 15 Pump End Only Bronze

    MP Pumps

    FM 15 Bronze Pump End Only

    21371
    $6,410.00
    Flomax 15 are self-priming pumps, pipe size 3" NPT. Gas Engine Driven Pump end only PEO for use with a 1" diameter crankshaft. For mounting to a gas engine. Also available in pedestal mount or for NEMA JM motor mounts. See other models. See fl...
    Learn More
    Add to Wish List Add to Compare
  2. dredge pump amt_316f-95

    AMT Pumps

    Dredge Pump - Pedestal

    316F-99
    23% Off Special Price $1,102.64 Regular Price $1,432.00
    No engine, Pedestal 3/4" keyed shaft for customer mount driver.
    • High Chromium Stainless Steel Internal Components Resist Wear from Sea Water Mixed with Abrasive Sand
    • Silicon Carbide Mechanical Seal Resists Abrasives and Extends Seal Life
    • H...
    Pedestal Mount w/ 3/4" Keyed Shaft Learn More
    Add to Wish List Add to Compare
  3. Hypro COMSV343T 316Stainless Steel pump 1HP

    Hypro Pumps

    316Stainless Steel pump 1HP

    COMSV343T
    $670.00

    1HP 316 Stainless Steel investment cast end-suction centrifugal pump. Used in commercial applications from chillers to commercial cleaning machines and chemical transfer. 

    This series of low pressure general transfer pumps are also available in C...

    230/460v/3 TEFC Learn More
    Add to Wish List Add to Compare
  4. amt 394g-95 pump

    AMT Pumps

    Sewage Trash pump 7.5HP

    394G-95
    25% Off Special Price $2,352.75 Regular Price $3,137.00

    Sewage Trash Pump, 7.5HP electric

    Self priming electric motor driven pumps for all sorts of medium sized debris. Factory sumps, Loading docks, wastewater pits, manure pits and high volume water transfer. Rugged American made pump. Motors are avai...

    230/460v 3P 20,400GPH, 3" 394A Learn More
    Add to Wish List Add to Compare
  5. American Stainless C14315B1T1-1-WG SS Pump Motor

    American Stainless

    SS Pump & Motor

    C14315B1T1-1-WG
    $1,506.55
    SSPC pumps have a one-piece shell, capable of supporting the pump and motor weight in a vertically mounted position. All pump parts including the base are 304 SS. The internal design also prevents any air from being trapped in the pump case when ...
    1HP 115/230V TEFC Learn More
    Add to Wish List Add to Compare
  6. MP 33212 FM30 Pump w/ no engine

    MP Pumps

    FM30 Pump w/ no engine

    33212
    $3,470.00
    Flomax 30 are self-priming pumps, pipe size 3" NPT. Pump End Only single seal for mounting to Gasoline engine with a 1" diameter shaft. Engine supplied separately.
    6.75" impeller Learn More
    Add to Wish List Add to Compare
  7. MP FM30-18 FM30 Pump w/ 18HP Engine

    MP Pumps

    FM30 Pump w/ 18HP Engine

    39143
    $8,280.00

    Flomax 30 are self-priming pumps, pipe size 3" NPT. FM30 Pump with single seal and 18HP Briggs & Stratton engine. Use for irrigation, dewatering, tank filling, bilge, HDD, pilings and other large water transfer or construction applications. Pump i...

    Learn More
    Add to Wish List Add to Compare
  8. MP 43928 2CT Trash Pump PEO

    MP Pumps

    2CT-3HS Trash Pump PEO

    43928
    $2,880.00

    2CT Jaeger Trash Pumps, self-priming, cast iron. Pumpak for close-coupled electric motor drive provided separately.

    The Model 2CT is a 2" x 2" Self Priming Trash Pump which can be close coupled 184TC motor 3450rpm. This unit has cast iron constru...

    For electric Learn More
    Add to Wish List Add to Compare
  9. MP 43931 2CT Trash Pump PEO

    MP Pumps

    2CT Trash Pump PEO

    43931
    $2,600.00
    2CT Jaeger MP Trash Pumps, self-priming, cast iron. Pumpak for close-coupled electric motor drive provided separately.

    The Model 2CT is a 2" x 2" Self Priming Trash Pump which can be close coupled. This unit has cast iron construction with a du...

    Learn More
    Add to Wish List Add to Compare
  10. MP - 33354: FM40 Engine Mount Pump

    MP Pumps

    FM40 Engine Mount Pump

    33354
    $8,300.00
    Flomax 40 are self-priming pumps, pipe size 4" NPT. PUMPAK for Engine Drive. Used for irrigation, ship fire protection, and other water pump applications requiring high pressure and high flow. ENGINE NOT INCLUDED, use 18-50 HP.
    For engine drive mount CI Learn More
    Add to Wish List Add to Compare
View as List Grid

Items 61-70 of 372

Set Descending Direction
per page
Page
Compare Products
  1. Remove This Item
Compare
Clear All
Shop By
Now Shopping by
  1. Category Solids Handling Pumps Remove This Item
Clear All
Shopping Options
Phase (Ø)
  1. Single (1) 103 items
  2. Three (3) 154 items
Voltage (Range)
  1. 110-120 1 item
  2. 208-230/460//190-220/380-415 1 item
  3. 208-240 3 items
  4. 220-240/460-480 135 items
  5. 110-120/220-240 78 items
  6. 220-240 25 items
  7. 208-240/460 11 items
  8. 460-480 5 items
  9. 12/24/36 VDC 6 items
Horse Power (HP)
  1. 1/3 1 item
  2. 1/2 23 items
  3. 3/4 22 items
  4. 1 37 items
  5. 1 1/2 38 items
  6. 2 39 items
  7. 3 45 items
  8. 4 3 items
  9. 5 49 items
  10. 5 1/2 8 items
  11. 7 2 items
  12. 7 1/2 12 items
  13. 8 9 items
  14. 9 4 items
  15. 10 9 items
  16. 11 3 items
  17. 13 3 items
  18. 15 2 items
  19. 18 2 items
  20. 20 1 item
  21. 25 1 item
  22. 30 2 items
  23. 125 1 item
inlet size
  1. 1" 12 items
  2. 1 ¼" 63 items
  3. 1 ½" 54 items
  4. 2" 121 items
  5. 3" 49 items
  6. 4" 8 items
  7. 6" 2 items
  8. 8" 1 item
PRICE $
$  -  $
Motor
  1. Diesel Engine 13 items
  2. EXP (C 1, Gp C/D & C11, Gp F/G) 19 items
  3. EXP (C 1, Gp C/D) 5 items
  4. EXP (C 1, Gp D) 4 items
  5. Gas Engine 40 items
  6. Hermetically Sealed 10 items
  7. Hydraulic Motor 7 items
  8. ODP 68 items
  9. PTO 10 items
  10. TEFC 150 items
  11. TENV 6 items