Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
Berkeley Pumps
Electric Self-Priming Pump
B60769
$8,768.00The type B, Self Priming pumps are built for continuous dependable performance and ease of repair. High lift designs allow suction lifts up to 25 feet at sea level. Ideal for transfer applications, standby fire protection, dewatering and irriga...
15HP 230/460v 3" Learn More -
Berkeley Pumps
B1-1/2ZPL (15HP - Three Phase - CI)
B53753
$8,275.00Berkeley Pumps offers a variety of models with the pump attached directly to the motor frame.- All pumps offer back pull-out design
- Impeller size is 9"
- Berkeley Pump discharge size: 1-1/2"
- Berkeley Pump suction size: 2"
15HP 230/460v PACKING Learn More -
Griswold Pumps
Irrigation Pump
15JMT
$6,342.50Irrigation pump. Designed for applications where moderate amounts of dirt and debris might be in the water. The semi-open cast iron impeller is designed to handle this abrasive material better than an enclosed impeller. This impeller can easily b... -
Berkeley Pumps
B3ZPM (15HP - Three Phase - CI)
B51711
$11,231.00Berkeley Pumps offers a variety of models with the pump attached directly to the motor frame.- All pumps offer back pull-out design
- Impeller size is trimmed to 9"
- Berkeley Pump discharge size: 3"
- Berkeley Pump suction size: 4"
15hp 230/460v packing Learn More -
EBARA Pumps
SS Pump 15 HP NSF
A3U-40-200B-150D3C
$4,198.00NSF EBARA Stainless Steel 3U Series Centrifugal Pumps are designed for dependability, performance and rugged continuous duty service under the most severe conditions. These pumps are guaranteed tough, engineered for the professional and built for ...
15HP 230/460V ODP Learn More -
Berkeley Pumps
B1-1/2ZPH (15HP - Three Phase - CI)
B53759
$9,695.00Berkeley Pumps offers a variety of models with the pump attached directly to the motor frame.- All pumps offer back pull-out design
- Impeller size is 9"
- Berkeley Pump discharge size: 1-1/2"
- Berkeley Pump suction size: 2"
15HP 230/460v packed Learn More -
Berkeley Pumps
B3ZPMS Centrifugal Water Pump
B54118
$10,836.00End suction centrifugal pump, close coupled with mechanical seal. Used for irrigation, fountains and other water transfer applications.15HP 230/460v/3 ODP Learn More -
Berkeley Pumps
B1-1/2ZPLS
B54504
$8,002.00Berkeley Pumps offers a variety of models with the pump attached directly to the motor frame.- All pumps offer back pull-out design
- American Made
- Berkeley Pump discharge size: 1-1/2"
- Berkeley Pump suction size: 2"
15HP 230/460v Seal Learn More -
Berkeley Pumps
B3TPMS Centrifugal Water Pump 15HP/3ph
B74766
$8,183.00End suction centrifugal pump, close coupled with mechanical seal. Used for irrigation, commercial swimming pool and other water transfer applictions.15HP 3600/60/3 230/460V Learn More -
Myers Pumps
Frame Mtd. 2 Stage w/ motor
I2CIB-15M
$9,510.00Myers I2C, I2CI and I2CS Two-Stage Centrifugal pumps are designed and built for rugged continuous duty service. These high head (to 400 feet) medium capacity (to 140 GPM) are available in standard fitted (I2C), iron & bronze fitted (I2CI) epoxy c...
