Turbine Pump 3/4HP
-
Manufacturer:
-
Series (29 Models):
-
Product Name:Turbine Pump 3/4HP
-
Model Number:T41BAI753TB
MTH T41BAI753TB
Mechanically sealled regenerative turbines for low flow high
pressure applications. Serving a wide variety of markets and
industries including boiler feed, condensate return, chillers /
temperature controllers, refrigeration, petroleum, as well as the
chemical industry and many other process applications.All units are
tested to specifications before leaving the factory.They are used
for boiler feed, condensate return and other hot water handling
applications and will handle entrained air, or other gases and
vapors in quantities that would vapor bind normal centrifugal pumps
(up to 20% by volume).
Low NPSH Requirements
| Model Number | T41BAI753TB |
|---|---|
| Series | MTH T41 Regenerative Turbine Pump to 20gpm |
| Max Flow (GPM.) | 4 |
| Max Flow GPH | 240 |
| TDH Maximum (Ft) | 600 |
| TDH Maximum (PSI) | 260 |
| Horse Power (HP) | 3/4 |
| Horsepower (IE .5, 1, 1.5, 20) | 0.7500 |
| Inlet Connection Type | FNPT |
| inlet size | 1" |
| Inlet (In.) | 1 |
| Outlet Connection Type | FNPT |
| Outlet (In.) | 1 |
| Wetted Materials | Cast Iron |
| Elastomers / O-ring | Buna-Nitrile |
| Voltage (V) | 208-230/460 |
| Voltage (Range) | 208-240/460 |
| Phase (Ø) | Three (3) |
| Motor Frequency | 50/60 |
| Motor | TEFC |
| Speed (RPM.) | 3450 |
| Motor Frame | 56C |
| Self Priming | No |
| Max Operating Temperature (F) | 230 |
| Viscosity | Milk 3.20 cp 40.00 ssu |
| Shaft | 304SS |
| Length (In.) | 15.000000 |
| Mechanical Seal | No |
| Mechanical Seal Face | Carbon-ceramic |
| Mechanical Seal Type | Single |
| Impeller Number (In.) | B |
| Other | Bronze is ASTM B62. Pumps can be rotated in 90 increments or mounted vertically. Handles vapors up to 20% by volume. Low NPSHr. |
| Drain | Yes |
| Port Rotation | Yes |
| Weight (Lbs) | 48.000000 |
Supporting Docs
Supporting Docs
You May Be Interested In
