Submersible "Non-Clog" Pump 6"
Series (46 Models):
Product Name:Submersible "Non-Clog" Pump 6"
6" Submersible Sewage "Non-Clog" Pump. Heavy duty sewage ejector pump with double SiC oil filled shaft seal. Uses include commercial sewage, loading docks and other wastewater pits where a non-clog 6" submersible pump is needed with high flow. 6" Horizontal Discharge Solids Handling Pump 6" horizontal discharge handles up to 4" spherical solids. For use in municipal lift stations, treatment plants and industrial waste applications. Motor sizes from 9 to 30HP. Capacities to 1265 gpm Heads to 110 ft. 62170280
- DISCHARGE 6" 125LB ANSI Flange.
- LIQUID TEMPERATURE 104° F (40° C) continuous.
- VOLUTE Cast iron ASTM A-48 class 30.
- MOTOR HOUSING Cast iron ASTM A-48 class 30.
- SEAL PLATE Cast iron ASTM A-48 class 30.
- IMPELLER Design: 1 vane, closed.
- IMPELLER Material: cast iron ASTM A-48 class 30, dynamically balanced, ISO G6.3.
- SHAFT 416 series stainless steel.
- O-RINGS Square shaped Buna-N.
- PAINT Air dry enamel, water based.
- SEAL Design:Double SiC, mechanical, oil filled chamber.
- SEAL Material : Silicon carbide outboard, with stainless steel hardware.
- HARDWARE 300 series stainless steel.
- CORD ENTRY 25 ft of neoprene cord SJTOW 10/4, sealed against moisture.
- MOISTURE SENSOR Normally open included.
- TEMPERATURE SENSOR Normally closed included.
- BEARINGS Upper: ball, single row, oil lubricated, for radial load. Lower: ball, single row, oil lubricated, for radial and thrust load.
- MOTOR NEMA B, 60 Hz, 1150 RPM, oil filled, with overload protection in motor.
- PUMP OPERATION Manual, does not include level control. See Options
- OPTIONAL EQUIPMENT Additional cord and slide rail coupling (SRC-2).
|Series||Barmesa Industrial Pumps|
|Max Flow (GPM.)||1800|
|Max Flow GPH||108000|
|TDH Maximum (Ft)||110|
|TDH Maximum (PSI)||47|
|Horse Power (HP)||30|
|Horsepower (IE .5, 1, 1.5, 20)||30|
|Outlet Connection Type||Flange|
|Wetted Materials||Cast Iron|
|Elastomers / O-ring||Buna-Nitrile|
|Phase (Ø)||Three (3)|
|Motor Amps (A)||41|
|Max Operating Temperature (F)||104|
|Max Particle Size (In)||4|
|Viscosity||SAE 10 oil 88.00 cp 500.00 ssu|
|Mechanical Seal||OIL FILLED|
|Mechanical Seal Face||SiC|
|Mechanical Seal Type||Double|
|Impeller Size (IN.)||14.6|
|Other||PumpBiz offers a complete line of wastewater pumps, lift-out rail assemblies, controls and accessories to meet your needs.|
|Impeller Material||open, double vane. cast iron ASTM A-48 class 30, dynamically balanced, ISO G6.3.|
|Motor Locked Rotor Amps (A.)||182|
|Cord Length (Ft.)||25|
|Country of Manufacture||Mexico|
|GPM Of Water At 40 Feet Of Head||1400|
|GPM Of Water At 50 Feet Of Head||1200|
|GPM Of Water At 60 Feet Of Head||1100|
|GPM Of Water At 80 Feet Of Head||600|
During the 1970's, new additions were made to the line of products and we started manufacturing submersible solids handling pumps as well as grinder pumps.
Today after more than 60 years, we have manufacturing facilities & distribution centers across America, and an extensive distributor network. Our State of the Art manufacturing facilities have modern CNC machinery as well sophisticated design and test capabilities. Barmesa serves markets such as marine, commercial, municipal, wastewater, water, industrial, construction, utility, chemical, OEM, irrigation, dewatering flood control, fire protection, as well as many other applications.
Our privately held family business is committed to offer an extensive variety of products with the best quality standards and on-time deliveries. We are proud to say "Quality Pumps Since 1953".