Submersible "Non-Clog" Pump
-
Model Number:
4BSE1503DS
-
Product Name:Submersible "Non-Clog" Pump
-
Manufacturer:
-
Series (49 Models):
208/230v/3P 15HP
Model Number
4BSE1503DS
$8,844.00
Barmesa 4BSE1503DS
Submersible Sewage "Non-Clog" Pump.
Heavy duty sewage ejector pump with Inboard oil filled shaft seal. Uses include residential / commercial sewage, loading docks and other pits where a non-clog submersible wastewater pump is needed with high flow. 4" Horizontal Discharge Solids Handling Pump 4" horizontal discharge handles up to 3" spherical solids. Motor sizes from 4 to 15HP Open and enclosed impellers, some with pump-out vanes on backside. Delta impellers available on some models Volutes available in both standard-efficiency concentric and high-efficiency scroll designs Capacities to 1265 gpm Heads to 258 ft. Replace Berkeley SW601200325MB
- DISCHARGE 4" 125LB ANSI Flange. (Sizes to 12" available)
- LIQUID TEMPERATURE 104ï½° F (40ï½° C) continuous.
- VOLUTE Cast iron ASTM A-48 class 30.
- MOTOR HOUSING Cast iron ASTM A-48 class 30.
- SEAL PLATE Cast iron ASTM A-48 class 30.
- IMPELLER Design: open, double vane.
- IMPELLER Material: cast iron ASTM A-48 class 30, dynamically balanced, ISO G6.3.
- SHAFT 416 series stainless steel.
- O-RINGS Square shaped Buna-N.
- PAINT Air dry enamel, water based.
- SEAL Design:Double, mechanical, oil filled chamber.
- SEAL Material : Silicon carbide outboard, with stainless steel hardware.
- HARDWARE 300 series stainless steel.
- CORD ENTRY 25 ft of neoprene cord SJTOW 10/4, sealed against moisture.
- MOISTURE SENSOR Normally open included.
- TEMPERATURE SENSOR Normally closed included.
- BEARINGS Upper: ball, single row, oil lubricated, for radial load. Lower: ball, single row, oil lubricated, for radial and thrust load.
- MOTOR NEMA B, 60 Hz, 1750 RPM, oil filled, with overload protection in motor.
- PUMP OPERATION Manual, does not include level control. See Options
- OPTIONAL EQUIPMENT Additional cord and slide rail coupling (SRC-2).
| Model Number | 4BSE1503DS |
|---|---|
| part number | 62170129 |
| Series | Barmesa Industrial Pumps |
| Max Flow (GPM.) | 700 |
| Max Flow GPH | 42000 |
| TDH Maximum (Ft) | 90 |
| TDH Maximum (PSI) | 39 |
| Horse Power (HP) | 15 |
| Horsepower (IE .5, 1, 1.5, 20) | 15 |
| Outlet Connection Type | Flange |
| Outlet (In.) | 4 |
| Wetted Materials | Carbon |
| Elastomers / O-ring | FKM |
| Voltage (V) | 208-230 |
| Voltage (Range) | 208-240 |
| Phase (Ø) | Three (3) |
| Motor Amps (A) | 15 |
| Motor | Hermetically Sealed |
| Speed (RPM.) | various |
| Suction Lift (FT.) | 7 |
| Max Particle Size (In) | 0.6 |
| Viscosity | Glycerine 880.00 cp 5000.00 ssu |
| Mechanical Seal | OIL FILLED |
| Mechanical Seal Face | SiC |
| Approvals | CSA |
| Motor Locked Rotor Amps (A.) | 160.0000 |
| Cord Size | 10/4 |
| Cord Length (Ft.) | 25 |
| Weight (Lbs) | 152.000000 |
| Warranty (YRS.) | 1 |
| GPM Of Water At 15 Feet Of Head | 70 |
| GPM Of Water At 50 Feet Of Head | 540 |
| GPM Of Water At 60 Feet Of Head | 400 |
>
