Submersible Dewatering Pump Contractor
-
Model Number:
PF01311SC
-
Product Name:Submersible Dewatering Pump Contractor
-
Manufacturer:
-
Series (8 Models):
Submersible 1HP 115v NO control box
Model Number
PF01311SC
$1,970.00
Power-Flo PF01311SC
Submersible Dewatering Pump for utility & below ground
contractor. Contractor heavy duty construction quality at a light
weight. Pump suction is Hard Anodized Aluminum with wear resitant
polyurethane liner.
Unique "boxless" model does NOT need a control box. Start components are built into the motor, thus providing a easier to use and lower cost dewatering pump.
| Model Number | PF01311SC |
|---|---|
| Series | Utility Contractor Submersible Dewatering Pump |
| Max Flow (GPM.) | 100 |
| Max Flow GPH | 6000 |
| TDH Maximum (Ft) | 45 |
| TDH Maximum (PSI) | 19 |
| Horse Power (HP) | 1 |
| Horsepower (IE .5, 1, 1.5, 20) | 1.0000 |
| Watts | 2750.000000 |
| Outlet Connection Type | FNPT |
| Outlet (In.) | 2 |
| Wetted Materials | 304SS, Aluminum |
| Elastomers / O-ring | Buna-Nitrile |
| Voltage (V) | 115 |
| Voltage (Range) | 110-120 |
| Phase (Ø) | Single (1) |
| Motor Frequency | 60 |
| Motor | Hermetically Sealed |
| Speed (RPM.) | 3450 |
| Self Priming | Yes |
| Max Operating Temperature (F) | 140 |
| Viscosity | Milk 3.20 cp 40.00 ssu |
| Stages | 1 |
| Shaft | 304SS |
| Length (In.) | 20.000000 |
| Mechanical Seal | OIL LUBRICATED |
| Mechanical Seal Face | Silicon Carbide |
| Mechanical Seal Type | Double |
| Motor Bearings | Ball, single row, shielded |
| Impeller Size (IN.) | 3.590000 |
| Approvals | cUL |
| Impeller Material | Polyurethane |
| Motor Locked Rotor Amps (A.) | 36.000000 |
| Cord Size | 14/4 |
| Cord Length (Ft.) | 50 |
| Motor Insulation | H |
| Drain | Yes |
| Port Rotation | Yes |
| Weight (Lbs) | 28.000000 |
| Warranty (YRS.) | 1 |
>
