Submersible Automatic Utility Pump
-
Manufacturer:
-
Product Name:Submersible Automatic Utility Pump
-
Model Number:BWU033PAS
1/3 HP 2,220 GPH (37gpm)
Model Number
BWU033PAS
$189.00
Glentronics sump BWU033PAS
Submersible Automatic Utility Pump with built in solid state (no moving parts) electronic level control (float switch) for un-attended automatic dewatering of nuisance water. Perfect as a sump pump for window wells, utility pump basement / cellar floors / crawl spaces, rooftops, patio, emptying kids pool, standing water in yard, irrigation from a rain harvest barrel. Corrosion resistant, sealed thermoplastic construction. Robust 200
Automatic operation without mechanical floats to get stuck or diaphragm pressure switch to go bad. Integrated Level switch prevents dry running which is the biggest cause of utility pump failure; after those that are simply cheap quality (you get what you pay for these days). Switch technology turns pump ON (1-3/4") and OFF (1/4") by sensing the presence of water. Removes water down to 1/4 inch of surface it is setting on. So it Can be left unattended to remove water. Simply "set it and forget it". One cord to plug in.
Bottom discharge prevents pump from easily tipping over due to weight of hose or being pulled. Unique swivel adapter means you can use several discharge hoses of your choice. 1-1/4" threaded pipe or hose or simple 3/4" Garden Hose (GH). If pumping to a much higher elevation, although there's no water left to pump, it hasn't completely cleared all of the water in the hose. To prevent the water from back flowing you can install a simple check valve. Then when the pump shuts off, the water already in the vertical hose will be held there and pumped out during the next automatic cycle. A further unique feature of the pump design is a one way air vent valve. This prevents "vapor lock" that other pumps have when used with a check valve.
Fits in a 7-1/2" diameter pit min.
Model Number | BWU033PAS |
---|---|
Max Flow (GPM.) | 37 |
Max Flow GPH | 2220 |
TDH Maximum (Ft) | 21 |
TDH Maximum (PSI) | 9 |
Horse Power (HP) | 1/3 |
Horsepower (IE .5, 1, 1.5, 20) | 0.33 |
Outlet Connection Type | Barb |
Outlet (In.) | 1.25 |
Wetted Materials | 304SS, Nylon |
Elastomers / O-ring | Buna-Nitrile |
Voltage (V) | 115 |
Voltage (Range) | 110-120 |
Phase (Ø) | Single (1) |
Motor Frequency | 60 |
Motor Amps (A) | 2.5 |
Motor | Hermetically Sealed |
Speed (RPM.) | 1750 |
Self Priming | Yes |
Max Operating Temperature (F) | 120 |
Viscosity | Cream 16.50 cp 100.00 ssu |
Motor Bearings | Ball bearing, oil filled |
Other | Dim: 7.5"x 6"x 11" Tall. Bottom has full size screen. |
Approvals | CSA |
Impeller Material | Noryl plastic, semi open |
Cord Size | 3-wire with molded on plug with ground. |
Cord Length (Ft.) | 10 |
Duty | Continuous |
Drain | No |
Port Rotation | Yes |
Weight (Lbs) | 12.000000 |
Warranty (YRS.) | 1 |
GPM Of Water At 5 Feet Of Head | 31 |
GPM Of Water At 10 Feet Of Head | 24 |
GPM Of Water At 15 Feet Of Head | 16 |
GPM Of Water At 20 Feet Of Head | 4.5 |
>