Stainless Steel Dewatering Pump

Ebara Stainless Steel Series Drainage submersible Pumps offer you a complete comprehensive range of submersible drainage pumps for pumping slurry, dirty and semi-dirty water. Never before have benefits this large been offered in a drainage pump. The versatility and rugged construction of these pumps allow for confident use in fixed or mobile service with either automatic or manual operation. 

Features are: 304 stainless construction including impeller, built-in overload with automatic reset, air-filled continuous duty motor, oil-lubricated double seal and 20Ft cord. Pump measures 6-3/8" Diameter at the base. Minimum start level is 3/4" from floor.

SS Pump is ideally suited for many industrial, commercial, agricultural and residential pumping applications. Applications such as basement sumps, flat roofs, boats, loading docks, swimming pools, fountains, dewatering and water transfer.

For models which include a Stainless Steel impeller and larger sizes see EPD-... models. Sizes range from 1/3 to 1-1/2HP 

Optional low suction device 2601400110, a plastic “skirt” to allow the pump to be able to pump water down to a lower level.  The misconception keep in mind is that the starting level of the water has to still be above the impeller.  It’s not a device to help pump a very low level of water like a small leak on a floor. Allows to pump down to about 1/8" of floor. Note: If automatic operation, the float prevents the pump from pumping to a low level.  For low level operation tie the float up and run manually or use the manual version of the pump.