SS pump & motor
-
Model Number:
C25438B5D3
-
Product Name:SS pump & motor
-
Manufacturer:
-
Series (123 Models):
5HP 230/460V ODP
Model Number
C25438B5D3
$1,073.27
American Stainless C25438B5D3
Models SSP & SSPC pumps have a one-piece shell, capable of supporting the pump and motor weight in a vertically mounted position. The internal design also prevents any air from being trapped in the pump case when mounted vertically. These pumps do not have a volute design casing, which can put a radial load on the motor bearing; and no diffuser to plug up, wear out, or replace. The SSP is an open impeller pump while the SSPC is a closed impeller pump, which will have a higher efficiency & pressure capability. These pumps are often used in various chillers.
Model Number | C25438B5D3 |
---|---|
Series | SSPC Centrifugal Pumps Stainless Steel |
Max Flow (GPM.) | 205 |
Max Flow GPH | 12300 |
TDH Maximum (Ft) | 115 |
TDH Maximum (PSI) | 50 |
TDH BEP (FT.) | 98.000000 |
Horse Power (HP) | 5 |
Horsepower (IE .5, 1, 1.5, 20) | 5.0000 |
Inlet Connection Type | FNPT |
inlet size | 2" |
Inlet (In.) | 2 |
Outlet Connection Type | FNPT |
Outlet (In.) | 1.5 |
Wetted Materials | 304SS |
Elastomers / O-ring | Buna-Nitrile |
Voltage (V) | 230/460 |
Voltage (Range) | 220-240/460-480 |
Phase (Ø) | Three (3) |
Motor | ODP |
Speed (RPM.) | 3450 |
Motor Frame | 56J thrd |
Self Priming | No |
Max Operating Temperature (F) | 220 |
Viscosity | Vegetable Oil 34.60 cp 200.00 ssu |
Shaft | 304SS |
Mechanical Seal Face | Carbon-ceramic |
Mechanical Seal Type | Single |
Impeller Size (IN.) | 5.380000 |
Other | Dishwashing Machines, Commerical Laundry, Chillers, Mold Cooling, Water Circulation |
Drain | Yes |
Port Rotation | Yes |
Weight (Lbs) | 55.000000 |
>