My Cart

SS pump & motor

1HP 115/230V ODP
Model Number
C15217B1D1
$866.92
American Stainless C15217B1D1 SS pump  motor

American Stainless C15217B1D1

SSPC Stainless pumps have a one-piece shell, capable of supporting the pump and motor weight in a vertically mounted position. The internal design also prevents any air from being trapped in the pump case when mounted vertically. These pumps do not have a volute design casing, which can put a radial load on the motor bearing; and no diffuser to plug up, wear out, or replace. SSPC is a closed impeller pump, which will have a higher efficiency & pressure capability.

Reduced HP for use below 32gpm. Motor is undersized to reduce cost and save energy while using this pump at the right side of its performance curve. Using more than 32gpm will overload motor. For higher flow rates choose model with 2HP motor.

More Information
Model Number C15217B1D1
Series SSPC Centrifugal Pumps Stainless Steel
Max Flow (GPM.) 32
Max Flow GPH 1920
Minimum Flow (GPM.) 2.0000
TDH Maximum (Ft) 105
TDH Maximum (PSI) 45
Horse Power (HP) 1
Horsepower (IE .5, 1, 1.5, 20) 1.0000
Inlet Connection Type FNPT
inlet size 1 ¼"
Inlet (In.) 1.25
Outlet Connection Type FNPT
Outlet (In.) 1
Wetted Materials 304SS
Elastomers / O-ring Buna-Nitrile
Voltage (V) 115/230
Voltage (Range) 110-120/220-240
Phase (Ø) Single (1)
Motor ODP
Speed (RPM.) 3450
Motor Frame 56J thrd
Self Priming No
Max Operating Temperature (F) 220
Viscosity Vegetable Oil 34.60 cp 200.00 ssu
Shaft 304SS
Mechanical Seal Face Carbon-ceramic
Mechanical Seal Type Single
Impeller Size (IN.) 5.250000
Other Dishwashing Machines, Commerical Laundry, Chillers, Mold Cooling, Water Circulation
Drain Yes
Port Rotation Yes
Weight (Lbs) 33.000000
>