SS pump & AIR motor
-
Manufacturer:
-
Series (123 Models):
-
Product Name:SS pump & AIR motor
-
Model Number:C25057B5AIR
4HP Air-Pneumatic
Model Number
C25057B5AIR
$3,687.50
American Stainless C25057B5AIR
SSPC pumps have a one-piece shell, capable of supporting the pump
and motor weight in a vertically mounted position. The internal
design also prevents any air from being trapped in the pump case
when mounted vertically. These pumps do not have a volute design
casing, which can put a radial load on the motor bearing; and no
diffuser to plug up, wear out, or replace.
Pump is close coupled to a GAST brand 6AM air motor. Due to the max. RPM of the air motor of 3000 RPM, the flow and pressure will be slightly less than that show in the performance curve. Kalrez elastomers.
WARNING: Pumping of flammables or combustible liquids can generate a static electric discharge, causing fire or explosion resulting in injury or death. Read and understand operating instructions before starting this unit. Follow all federal, state and local safety codes including NFPA 30 -- NFPA77. Prior to connecting to air supply, install bond and ground wires and check continuity of each wire. A meter reading of one ohm or less is required for safe liquid transfer. Use only metallic drum, receiving vessel and metallic pump when pumping flammables. Air motors are not recognized under any current Underwriter's Laboratory listing program. Consult a qualified engineer for suitability for use in a hazardous area or on flammables.
| Model Number | C25057B5AIR |
|---|---|
| Series | SSPC Centrifugal Pumps Stainless Steel |
| Max Flow (GPM.) | 100 |
| Max Flow GPH | 6000 |
| TDH Maximum (Ft) | 95 |
| TDH Maximum (PSI) | 41 |
| Horse Power (HP) | 4 |
| Horsepower (IE .5, 1, 1.5, 20) | 4.0000 |
| Inlet Connection Type | FNPT |
| inlet size | 2" |
| Inlet (In.) | 2 |
| Outlet Connection Type | FNPT |
| Outlet (In.) | 1.5 |
| Wetted Materials | 304SS |
| Elastomers / O-ring | FKM |
| Motor | Air-Pneumatic |
| Speed (RPM.) | 3450 |
| Motor Frame | 56J thrd |
| Self Priming | No |
| Max Operating Temperature (F) | 220 |
| Viscosity | Vegetable Oil 34.60 cp 200.00 ssu |
| Shaft | 304SS |
| Mechanical Seal Face | Carbon-ceramic |
| Mechanical Seal Type | Single |
| Impeller Size (IN.) | 5.000000 |
| Drain | Yes |
| Port Rotation | Yes |
| Weight (Lbs) | 55.000000 |
>
You May Be Interested In
