My Cart

SS horizontal pump 1725

Model Number
S243628ETC
$798.61
American Stainless S243628ETC SS horizontal pump 1725
Models SSP & SSPC pumps have a one-piece shell, capable of supporting the pump and motor weight in a vertically mounted position. The internal design also prevents any air from being trapped in the pump case when mounted vertically. These pumps do not have a volute design casing, which can put a radial load on the motor bearing; and no diffuser to plug up, wear out, or replace. The SSP is an open impeller pump while the SSPC is a closed impeller pump, which will have a higher efficiency & pressure capability.

1725 RPM TEFC, SiC vs. SiC seal faces for abrasives, 1.5 HP for high SG and viscosity.

More Information
Model Number S243628ETC
Series SSP 304SS Chemical Pumps
Max Flow (GPM.) 85
Max Flow GPH 5100
TDH Maximum (Ft) 17
TDH Maximum (PSI) 7
Horse Power (HP) 1 1/2
Horsepower (IE .5, 1, 1.5, 20) 1.5000
Inlet Connection Type FNPT
inlet size 2"
Inlet (In.) 2
Outlet Connection Type FNPT
Outlet (In.) 1.5
Wetted Materials 304SS
Elastomers / O-ring Viton
Voltage (V) 230/460
Voltage (Range) 220-240/460-480
Phase (Ø) Three (3)
Motor Frequency 60
Motor TEFC
Speed (RPM.) 1725
Motor Frame 56J thrd
Self Priming No
Max Operating Temperature (F) 220
Viscosity Vegetable Oil 34.60 cp 200.00 ssu
Shaft 304SS
Mechanical Seal Face SiC
Mechanical Seal Type Single
Impeller Size (IN.) 4.380000
Other Dishwashing Machines, Commerical Laundry, Chillers, Mold Cooling, Water Circulation
Drain Yes
Port Rotation Yes
Weight (Lbs) 51.000000
Warranty (YRS.) 1
>