SS Booster Pump Coolant
-
Model Number:
M10B26-3PH-BZ
-
Product Name:SS Booster Pump Coolant
-
Manufacturer:
3HP 208-230/460V ODP
Model Number
M10B26-3PH-BZ
$5,167.80
Webtrol M10B26-3PH-BZ
Coolant pump for older Maintanence Services machines. Webtrol has
been building Booster Pumps For over 35 years for various
industrial, commercial and agricultural uses and has long been a
leader in the Reverse Osmosis and Deionization Industry.Webtrol's
commitment to quality is defined in the construction of each
Booster Pump, through useof only quality materials and precision
machining by journeyman machinist. Every pump is hand assembled and
checked during each step up to the final test where each pump is
checked for flow,pressure, power consumption, leaks, vibration and
noise.
Features / Benefits are:
.
Pump Shaft - Heavy duty stainless steel hex shaft with stainless
steel coupling.
Impellers - High strength, glass filled delrin or noryl impellars
precision machined for dimensional stability and efficiency.
Diffusers - Injection molded Polycarbonate or Noryl diffusers with
molded in stainless steel wear rings at all critical wear
points.
.
Mechanical Seals - Stainless steel constructed with Buna N
elastomers on cast iron models and FKM elastomers on stainless
steel models. Commercial duty model units have larger motors than
the general duty motors. 350PSI seal and oversized coupler.
Model Number | M10B26-3PH-BZ |
---|---|
Max Flow (GPM.) | 18 |
Max Flow GPH | 1080 |
TDH Maximum (Ft) | 804 |
TDH Maximum (PSI) | 348 |
Horse Power (HP) | 3 |
Horsepower (IE .5, 1, 1.5, 20) | 3.0000 |
Inlet Connection Type | FNPT |
inlet size | 1 ½" |
Inlet (In.) | 1.5 |
Outlet Connection Type | FNPT |
Outlet (In.) | 1.5 |
Wetted Materials | Cast Iron |
Elastomers / O-ring | Buna-Nitrile |
Voltage (V) | 208-230/460 |
Voltage (Range) | 208-240/460 |
Phase (Ø) | Three (3) |
Motor Frequency | 60 |
Motor | ODP |
Speed (RPM.) | 3450 |
Motor Frame | 56J thrd |
Self Priming | Yes |
Max Operating Temperature (F) | 140 |
Viscosity | Milk 3.20 cp 40.00 ssu |
Shaft | 416SS |
Length (In.) | 46.600000 |
Mechanical Seal | TYPE 21 |
Mechanical Seal Face | Carbon-ceramic |
Mechanical Seal Type | Single |
Motor Bearings | Ball |
Coupling | Y |
Other | 26 Stages |
Impeller Material | Polycarbonate, closed |
Cord Length (Ft.) | 0 |
Duty | Continuous |
Drain | Yes |
Port Rotation | Yes |
Country of Manufacture | United States |
Weight (Lbs) | 70.000000 |
Warranty (YRS.) | 1 |
>