My Cart

Run dry 24vdc Washdown

Marine Washdown
Model Number
Run dry 24vdc Washdown

Jabsco 32605-0094

This 4.0 GPM (15 LPM) Washdown Pump provides the boater of small to medium vessels with a cost conscious and size maximised higher pressure pump. With a sealed pump head and motor, this new model provides the same ease of installation as all Jabsco water pressure pumps. Included with each pump is a strainer, nozzle, and fittings for most installations.Flow rate to 4.0 USgallons/min (15 Litres/min) Pressure up to 60 psi (4.1 bar) Self-priming up to 8 feet (2.5m)
More Information
Model Number 32605-0094
Series 23920 Run Dry DC Pump
Max Flow (GPM.) 4
Max Flow GPH 240
TDH Maximum (Ft) 60
TDH Maximum (PSI) 8
Watts 0.000000
Inlet Connection Type Barb
Inlet (In.) 0.75
Outlet Connection Type Barb
Outlet (In.) 0.75
Wetted Materials PolyPro
Elastomers / O-ring Buna-Nitrile
Voltage (V) 24DC
Voltage (Range) 12/24/36 VDC
Motor TENV
Speed (RPM.) 1725
Self Priming Yes
Suction Lift (FT.) 4
Max Operating Temperature (F) 180
Viscosity SAE 30 oil 352.00 cp 2000.00 ssu
Shaft 304SS
Length (In.) 7.500000
Mechanical Seal No
Mechanical Seal Type Single
Other FLA listed above is the fuse size. Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protection). ISO 8849 MARINE (Bilge Pump Standard). Size: 7 1/2" X 4 3/4" X 3 1/2"
Drain Yes
Port Rotation Yes
Weight (Lbs) 8.000000
Warranty (YRS.) 1

Supporting Docs

Supporting Docs
(Size: 315.79 KB) Extension: pdf