PCE2EL-PNC
-
Model Number:
60-12E4-PNC
-
Product Name:PCE2EL-PNC
-
Manufacturer:
-
Series (24 Models):
Model Number
60-12E4-PNC
$1,299.75
Pacer 60-12E4-PNC
PC Horizontal Pump
All major pump parts are precision molded of tough, corrosion resistant glass-reinforced polyester thermoplastic. These high strength plastics provide resistance to many liquids and salt water at temperatures as high as 200F (93C). "O"-rings and seals are EPDM, opt. FKM,. Fasteners are stainless steel internal fasteners.
The 1 1/2" and 2" models are the same pump with both ports threaded 1 1/2" female and 2" male. The 3" pump has male threads only.
Pumps may be ordered with a chemical resistant Noryl bearing pedestal for long coupled direct drive or a cast iron pedestal for belt drive or heavy duty service. Close-coupled drives include electric, hydraulic or pneumatic motors and gasoline engines through 8HP.
- Non-metallic solution contact models available in all stock materials
- Flows to 230 U.S. GPM or 94 ft. TDH at 60 Hz (725 LPM or 20 M at 50Hz)
- Selection of drives-- Electric, Hydraulic or Pneumatic motors. Gasoline or Diesel Engines.
- Now available close-coupled to electric motors through 5HP
| Model Number | 60-12E4-PNC |
|---|---|
| Series | PC Plastic Corrosion Resistant Pump To 230gpm |
| Max Flow (GPM.) | 150 |
| Max Flow GPH | 9000 |
| TDH Maximum (Ft) | 65 |
| TDH Maximum (PSI) | 28 |
| Inlet Connection Type | FNPT |
| inlet size | 2in |
| Inlet (In.) | 2 |
| Outlet (In.) | 2 |
| Wetted Materials | SS-Plastic |
| Elastomers / O-ring | EPDM |
| Motor Frequency | 60 |
| Motor | Air-Pneumatic |
| Speed (RPM.) | 2850 |
| Self Priming | No |
| Max Operating Temperature (F) | 200 |
| Viscosity | Milk 3.20 cp 40.00 ssu |
| Mechanical Seal Face | Carbon-ceramic |
| Mechanical Seal Type | Single |
| Other | Consult PumpBiz for various options. Flow and pressure are derated from performance curve due to air motors slower max. RPM. |
| Drain | Yes |
| Port Rotation | Yes |
| Weight (Lbs) | 36.000000 |
| Warranty (YRS.) | 1 |
>
