NSF Potable Water Pump Honda Gas Engine
Series (14 Models):
Product Name:NSF Potable Water Pump Honda Gas Engine
Honda 5HP SS 2"
NSF Potable Water Pump Honda Gas Engine.
Food grade Stainless Steel Self-Priming Centrifugal water Pump Honda gas engine powered, Pump casing is made of FDA 304 stainless steel. Internal parts are glass reinforced polyester or glass reinforced polypropylene. All pumps include a built-in check valve. Honda engine. P-57-12W4-E5HCP
These pumps are standard for mobile shower or personal water resource systems often found in mobile operations. Use for portable water systems or field camps. Case is polished 304 SS, drive included is Honda gas engine. NO roll cage.
High flow Pump shown in picture does NOT includes roll cage 58-0009. The repair kit is 58-0099
NSF FDA potable water version
NSF/ANSI 61 & 372, the American National Standard for Drinking Water System Components. This certification comes from the global public health organization NSF International. Available now is our IPW Series of self-priming centrifugal pumps. The IPW Series is a self-priming centrifugal pump with a vertical suction lift of 20 feet and a maximum flow rate of 180 gallons per minute. It is ideal for transferring and delivery of bulk potable (drinking) water. Pump construction features stainless steel casing, FDA grade polypropylene internal components and FDA grade elastomers.
Electric versions of this NSF/ANSI certified pump are available along with other types and smaller sizes of potable drinking water pumps.
Available drivers include gasoline engine, electric motor, hydraulic motor and bearing pedestal mounted. Also available as a wet end only to replace an existing Pacer Pump. PumpBiz sells all types of other electric NSF potable water pumps. Some used for beer and wine making.
|Series||I Stainless Self Prime pump 140 gpm|
|Max Flow (GPM.)||180|
|Max Flow GPH||10800|
|TDH Maximum (Ft)||76|
|TDH Maximum (PSI)||33|
|Horse Power (HP)||5 1/2|
|Horsepower (IE .5, 1, 1.5, 20)||5.5000|
|Inlet Connection Type||MNPT|
|Outlet Connection Type||FNPT|
|Wetted Materials||304SS, Polyester|
|Elastomers / O-ring||EPDM|
|Suction Lift (FT.)||20|
|Max Operating Temperature (F)||130|
|Viscosity||Milk 3.20 cp 40.00 ssu|
|Mechanical Seal Face||Carbon-ceramic|
|Mechanical Seal Type||Single|
|Other||Connections are dual 2" outside and 1.5" NPT inside double thread. Includes 1/4" drain plug.|
|Impeller Material||FRP, semi-open|
|Country of Manufacture||United States|
|GPM Of Water At 20 Feet Of Head||160|
|GPM Of Water At 40 Feet Of Head||125|
|GPM Of Water At 50 Feet Of Head||85|
|GPM Of Water At 60 Feet Of Head||60|