N992 Gear Pump PEO
Series (13 Models):
Product Name:N992 Gear Pump PEO
Gear Pump pump end only, 1/4". Pump housings and gears are made of top quality bronze; shafts are from stainless steel 303. Bearings are designed of high performance carbon-graphite material selected for wear resistance and long service life. Includes relief valve in pump head. Often used on Royal Bond aspirator.
Gear pumps are positive displacement pumps. Each shaft revolution displaces a definite amount of liquid relatively unaffected by the back pressure in the discharge line. Shaft speed and flow are directly proportional. Recommended pressure limits are 100 psi for water and non-lubricants, 150 psi for oil and lubricants. Maximum shaft speed is 1750 rpm. Use 56C adapter 11331 or 48 adapter 10562.
A relief valve is necessary in the system if the discharge line contains any throttling devices, such as a shut-off valve, a spray nozzle or other restrictive device. This will return the liquid to the suction side or to the tank. The relief valve is also available as part of the pump itself (R-model pumps). However, built-in relief valves are only good for intermittent service. A built-in relief valve is strictly a safety device against overpressure. It will not work successfully as a pressure or flow control device. For this purpose a separate relief valve in the pressure line must be used.
Service life will be increase substantially if the liquid pumped is clean and has a lubricity value. These pumps have extremely close tolerances.
|Series||N992 Gear Pumps|
|Max Flow (GPM.)||4|
|Max Flow GPH||240|
|TDH Maximum (Ft)||347|
|TDH Maximum (PSI)||150|
|Inlet Connection Type||FNPT|
|inlet size||Less than 1"|
|Outlet Connection Type||FNPT|
|Wetted Materials||304SS, Bronze|
|Elastomers / O-ring||Buna-Nitrile|
|Suction Lift (FT.)||20|
|Max Operating Temperature (F)||140|
|Viscosity||Glycerine 880.00 cp 5000.00 ssu|
|Mechanical Seal||LIP SEAL|
|Mechanical Seal Type||Single|
|Country of Manufacture||United States|