My Cart

N991 Oberdorfer Bronze gear pump & motor

115v 3/8"
Model Number
N991-32F41
$753.00
Oberdorfer N991-32F41 N991 Oberdorfer Bronze gear pump  motor

Oberdorfer N991-32F41

Oberdorfer Bronze gear pump & motor. 3/8" Pump housings and gears are made of top quality bronze; shafts are from stainless steel 303. Bearings are designed of high performance carbon-graphite material selected for wear resistance and long service life.

Gear pumps by Oberdorfer are positive displacement pumps. Each shaft revolution displaces a definite amount of l9iquid relatively unaffected by the back pressure in the discharge line. Shaft speed and flow are directly proportional. Recommended pressure limits are 100 psi for water and non-lubricants, 150 psi for oil and lubricants.

A relief valve is necessary in the system if the discharge line contains any throttling devices, such as a shut-off valve, a spray nozzle or other restrictive device. This will return the liquid to the suction side or to the tank. The relief valve is also available as part of the pump itself (R-model pumps). Often used for diesel fuel transfer, glycol, calcium and magnesium chloride de-icing fluid. For this purpose a separate relief valve in the pressure line must be used.

Service life will be increase substantially if the liquid pumped is clean and has a lubricity value. These pumps have extremely close tolerances.

More Information
Model Number N991-32F41
part number N991-32F41
Series N Oberdorfer Gear Pumps Bronze
Max Flow (GPM.) 2
Max Flow GPH 120
TDH Maximum (Ft) 347
TDH Maximum (PSI) 150
Horse Power (HP) 1/3
Horsepower (IE .5, 1, 1.5, 20) 0.3300
Inlet Connection Type FNPT
inlet size Less than 1"
Inlet (In.) 0.375
Outlet Connection Type FNPT
Outlet (In.) 0.375
Wetted Materials 304SS, Bronze
Elastomers / O-ring Buna-Nitrile
Voltage (V) 115
Voltage (Range) 110-120
Phase (Ø) Single (1)
Motor Frequency 60
Motor ODP
Speed (RPM.) 1725
Self Priming Yes
Suction Lift (FT.) 20
Max Operating Temperature (F) 140
Viscosity Glycerine 880.00 cp 5000.00 ssu
Shaft 304SS
Mechanical Seal LIP SEAL
Mechanical Seal Type Single
Coupling Y
Other Motor has adapter face for pump mount.
Pump Bearing Carbon
Impeller Material Bronze gears
Cord Length (Ft.) 0
Drain No
Port Rotation Yes
Country of Manufacture United States
Weight (Lbs) 18.000000
Warranty (YRS.) 1
>