Low flow booster pump kit
-
Model Number:
6840-2J03-A331
-
Product Name:Low flow booster pump kit
-
Manufacturer:
-
Series (10 Models):
Model Number
6840-2J03-A331
$290.54
Aquatec 6840-2J03-A331
Pre-Filter water treatment RO Booster pump. In / Outlets are 1/4"
push-to-connect JG style for easy installation into R.O. water
supply line. Kit includes 12vdc to 115vac transformer with plug and
20-40 psi pressure switch for use with storage
tank.OPERATION: The 6800 is designed to operate with a PSW
Tank Shut-Off Switch for hydro-pneumatic storage systems. The PSW,
when used with a typical under-counter R.O. system, can be
augmented with an ESO Electronic Shut-Off Valve. It is also
compatible with most hydraulic shut-off valves. For counter-top
systems, Aquatec's TLC Tank Level Control Switch Valve shut off
feed water and the pump when the product water storage tank is
full.
POWER: Pumps operate with low energy (only 14 watts), low
voltage (12-24 volt) motors, powered with compatible transformers
with world wide primary voltages available (100 VAC, 120 VAC, 230
VAC). Transformers are optional and must be ordered in addition to
the pump.
FITTINGS: Built-in 1/4" John Guest half cartridge fittings
eliminate need for external fittings (unless elbows are required);
1/4" Jaco straight, 1/4" Jaco elbow fittings, or 8mm stem adapters
for metric tubing are optionaly available.
Key Operating Benefits
- Boosts pressure 40 to 120 psi (adjustable)
- Fixed pressure to 160 psi
- Up to 30,000+ operating hours
- Whisper quiet - less than 45 DBA
- Can run dry without damage
- Self-priming - 60" lift
- Low voltage (12-24V) for maximum safety 115v transformer available.
- Corrosion resistant exterior
- Continuous or intermittent operation
| Model Number | 6840-2J03-A331 |
|---|---|
| Series | 6800 Booster Pump Kit |
| Max Flow (GPM.) | 1 |
| Max Flow GPH | 60 |
| TDH Maximum (Ft) | 185 |
| TDH Maximum (PSI) | 80 |
| inlet size | Less than 1in |
| Inlet (In.) | 0.25 |
| Outlet (In.) | 0.25 |
| Wetted Materials | Nylon |
| Elastomers / O-ring | EPDM |
| Diaphragm | Santoprene |
| Voltage (V) | 115 |
| Voltage (Range) | 110-120 |
| Phase (Ø) | Single (1) |
| Motor | TENV |
| Self Priming | Yes |
| Suction Lift (FT.) | 3 |
| Max Operating Temperature (F) | 170 |
| Viscosity | Milk 3.20 cp 40.00 ssu |
| Length (In.) | 7.500000 |
| Mechanical Seal | No |
| Mechanical Seal Type | Double |
| Other | Some assembly required into system. |
| Drain | No |
| Port Rotation | No |
| Weight (Lbs) | 9.000000 |
>
