Irrigation Pump
-
Manufacturer:
-
Series (11 Models):
-
Product Name:Irrigation Pump
-
Model Number:MULP3005B
Munro MULP3005B
Irrigation Pump 5HP 230v
Munro sprinkler pump. Residential self-priming pump. LP075B Easy service desing. Professional construction. Designed specifically for turf irrigation, this self-priming pump provides outstanding performance to horsepower ratio. Our LP Series is truly heavy duty, offering standard high-end features that our competitors only offer as pricey add-ons. Professionals trust the LP Series to deliver trouble-free performance.
- Brass impeller – durable and low maintenance with the longest life in its class
- Stainless steel wear ring – eliminates impeller friction due to rust build-up
- Cast iron body and internal components – heavy duty for long-term performance and reliability
Durable and long lasting – While many centrifugal turf irrigation pumps are made out of plastic, which wears and warps, our cast iron construction and brass impeller mean that our self-priming pumps are built to stand the test of time, even in more unusual or difficult environments. Testing in tough conditions shows Munro LP series pumps last up to four times as long as typical competitors products.
Industry leading performance to horsepower – The proof is in our curves. In many cases a lower horsepower Munro LP pump will meet the same GPM performance that you’d expect to see only in higher horsepower pumps.
Motors are wired for 230v (high) as standard. To use on 115v (low) follow motor name plate wiring diagram. Pump rotation is CCW from pump-end.
Motor shaft is a full 1.25" diameter (instead of the typical 56J at .625"). Motor is a NEMA JM standard pump motor. Sturdy cast iron design engineered for years of trouble free service. Made in USA.
Model Number | MULP3005B |
---|---|
Series | Sprinkler Irrigation Pump LP |
Max Flow (GPM.) | 222 |
Max Flow GPH | 13320 |
TDH Maximum (Ft) | 150 |
TDH Maximum (PSI) | 65 |
Horse Power (HP) | 5 |
Horsepower (IE .5, 1, 1.5, 20) | 5.0000 |
Inlet Connection Type | FNPT |
inlet size | 3" |
Inlet (In.) | 3 |
Outlet Connection Type | FNPT |
Outlet (In.) | 3 |
Wetted Materials | Cast Iron |
Elastomers / O-ring | Buna-Nitrile |
Voltage (V) | 230 |
Voltage (Range) | 220-240 |
Phase (Ø) | Single (1) |
Motor Frequency | 60 |
Motor Amps (A) | 24.5 |
Motor | ODP |
Speed (RPM.) | 3450 |
Motor Frame | 182/4JM |
Self Priming | Yes |
Suction Lift (FT.) | 15 |
Max Operating Temperature (F) | 140 |
Viscosity | Milk 3.20 cp 40.00 ssu |
Shaft | 304SS |
Mechanical Seal Face | Carbon-ceramic |
Mechanical Seal Type | Single |
Other | Order a motor controller / starter seperately for a complete package. |
Impeller Material | Brass |
Cord Length (Ft.) | 0 |
Drain | Yes |
Port Rotation | No |
Country of Manufacture | United States |
Weight (Lbs) | 144.000000 |
Warranty (YRS.) | 1 |