Hi-Flo Dem Pump
-
Manufacturer:
-
Series (21 Models):
-
Product Name:Hi-Flo Dem Pump
-
Model Number:5503-1E12-J526
5GPM 60PSI 115v
Aquatec 5503-1E12-J526
4.9 GPM 60PSI Demand delivery pump. OPERATION: The 550 pumps can
draw water from a holding tank and pressurizeit, or boost the
pressure from a low pressure source. It is designed to operate
intermittently, but most versions can run continuously for several
hour intervals.It can be operated in demand mode controlled by an
integral pressure switch,or in delivery mode controlled by an
external power switching device. Anintegral bypass may be used to
limit pressure.
POWER: The power demand varies depending on flow and
pressure from 50W to 200W. Motors are available in various
configurations from 12 VDC to 230 VAC. Transformersor DC power
supplies are optional and must be ordered separately if
applicable.
MOUNTING: A steel mounting base with four hollow rubber
grommets is standard and includedat no extra cost. The pump may be
mounted in any position.
FITTINGS: The standard pump head has a .50" port opening
that accepts "quick connect" beverage style O-ring barb fittings.
Includes 6FT power cord and plug.
*Geolast- nitrile based thermoplastic elastimer used in place of nitrile (Buna-N) or neoprene for non-aggressive water-based applications *Santoprene- EPDM-based thermoplastic elastimer and is resistant to mild acids, some solvents and bases
| Model Number | 5503-1E12-J526 |
|---|---|
| Series | Demand Pump Electric Diaphragm 550 |
| Max Flow (GPM.) | 5 |
| Max Flow GPH | 300 |
| TDH Maximum (Ft) | 138 |
| TDH Maximum (PSI) | 60 |
| Inlet Connection Type | Barb |
| inlet size | Less than 1" |
| Inlet (In.) | 0.5 |
| Outlet Connection Type | Barb |
| Outlet (In.) | 0.5 |
| Wetted Materials | PolyPro-GF |
| Elastomers / O-ring | EPDM |
| Diaphragm | Santoprene |
| Voltage (V) | 115 |
| Voltage (Range) | 110-120 |
| Phase (Ø) | Single (1) |
| Motor Frequency | 50/60 |
| Motor | TENV |
| Self Priming | Yes |
| Suction Lift (FT.) | 11 |
| Max Operating Temperature (F) | 140 |
| Viscosity | SAE 10 oil 88.00 cp 500.00 ssu |
| Mechanical Seal | No |
| Mechanical Seal Type | Double |
| Other | 6' POWER CORD. |
| Drain | No |
| Port Rotation | No |
| Weight (Lbs) | 9.000000 |
| Warranty (YRS.) | 1 |
>
You May Be Interested In
