My Cart

Floor Level Residue Pump

115v 45GPM 2700GPH 2/3HP
Model Number
LSC1.4S
$683.75
tsurumi_lsc1.4S-61 floor level submersible pump

Tsurumi LSC1.4S

Tsurumi LSC1.4S Submersible Pump – Floor Sucker Pump


Ideal for Complete Drainage Where a Sump Isn't Available

The Tsurumi LSC1.4S is designed for complete drainage of flat surfaces where traditional sump pumps can’t be used. 

This floor sucker pump can be used fully or partially submerged, indoors or outdoors, or placed directly on any flat surface to pump clear water. It easily primes through the discharge outlet, allowing startup at any water level. 

Key Features:

  • Pumps down to as low as 1/32" of water.
  • Continuous running water level: 0.04" (3/8").
  • Durable urethane semi-vortex impeller and wear plates maximize durability and maintain pump performance.
  • Dry-run capable for extended periods without damage.
  • Double mechanical seal with Silicon Carbide (SiC) faces for the longest operating life.
  • V-Ring Seal Protector protects mechanical seals from abrasive particles.
  • Oil Lifter system provides continuous lubrication to seal faces.
  • Dual-position discharge port (vertical or horizontal) for flexible setup.
  • Standard 3/4" discharge with pipe thread connection — easily adaptable to garden hoses. (Tip: larger diameter hoses increase flow; garden hoses may have different diameters even with the same size connection.)
  • 32-foot power cord included.
  • 7-11/16" diameter compact pump body.
  • 2-Year Warranty for peace of mind.

Additional Options & Compatibility:

  • Float switch for automatic operation (sold separately).
  • Level control systems for hands-free operation (see below).
More Information
Model Number LSC1.4S
Series Submersible Dewatering Pumps Tsurumi
Max Flow (GPM.) 45
Max Flow GPH 2700
TDH Maximum (Ft) 40
TDH Maximum (PSI) 17
Horse Power (HP) 2/3
Horsepower (IE .5, 1, 1.5, 20) 0.67
Outlet Connection Type MNPT
Outlet (In.) 0.75
Wetted Materials Cast Iron, PolyPro-GF
Elastomers / O-ring Buna-Nitrile
Voltage (V) 115
Voltage (Range) 110-120
Phase (Ø) Single (1)
Motor Frequency 60
Motor Amps (A) 6.1
Motor Hermetically Sealed
Speed (RPM.) 3450
Max Operating Temperature (F) 104
Max Particle Size (In) 0.24
Viscosity Milk 3.20 cp 40.00 ssu
Stages 1
Length (In.) 12.5
Mechanical Seal Face SiC
Mechanical Seal Type Double
Motor Bearings Ball
Other Max. Diameter (inch) : 9 1/8,Max. Height (inch): 14 3/16 , Continuous Running Water Level 0.04 inches. Seal Lubricant - Type : Turbine Oil (ISO VG32) or SAE 10W/20W. Double shielded, permanently lubricated, high-temp C3 with B-10 life of 60,000 hours. 1800 watts generator min. Starting current 12.5
Impeller Material Urethane rubber, semi-vortex
Cord Size 16/3
Cord Length (Ft.) 32
Duty Continuous submerged or not.
Country of Manufacture Japan
Weight (Lbs) 34.000000
Warranty (YRS.) 2
GPM Of Water At 10 Feet Of Head 40
GPM Of Water At 20 Feet Of Head 31
GPM Of Water At 30 Feet Of Head 20
>
As a pioneer in the submersible pumps, Tsurumi Pump is contributing to the people all over the world by supplying the products that always support people’s lives such as submersible pumps for wastewater and construction, centrifugal pumps, vacuum pumps, and water treatment equipment, etc. and also by offering technologies that control and protect water.