Floor Level Residue Pump
-
Model Number:
LSC1.4S
-
Product Name:Floor Level Residue Pump
-
Manufacturer:
-
Series (17 Models):
115v 45GPM 2700GPH 2/3HP
Model Number
LSC1.4S
$683.75
Tsurumi LSC1.4S
Tsurumi LSC1.4S Submersible Pump – Floor Sucker Pump
Ideal for Complete Drainage Where a Sump Isn't Available
The Tsurumi LSC1.4S is designed for complete drainage of flat surfaces where traditional sump pumps can’t be used.
This floor sucker pump can be used fully or partially submerged, indoors or outdoors, or placed directly on any flat surface to pump clear water. It easily primes through the discharge outlet, allowing startup at any water level.
Key Features:
- Pumps down to as low as 1/32" of water.
- Continuous running water level: 0.04" (3/8").
- Durable urethane semi-vortex impeller and wear plates maximize durability and maintain pump performance.
- Dry-run capable for extended periods without damage.
- Double mechanical seal with Silicon Carbide (SiC) faces for the longest operating life.
- V-Ring Seal Protector protects mechanical seals from abrasive particles.
- Oil Lifter system provides continuous lubrication to seal faces.
- Dual-position discharge port (vertical or horizontal) for flexible setup.
- Standard 3/4" discharge with pipe thread connection — easily adaptable to garden hoses. (Tip: larger diameter hoses increase flow; garden hoses may have different diameters even with the same size connection.)
- 32-foot power cord included.
- 7-11/16" diameter compact pump body.
- 2-Year Warranty for peace of mind.
Additional Options & Compatibility:
- Float switch for automatic operation (sold separately).
- Level control systems for hands-free operation (see below).
| Model Number | LSC1.4S |
|---|---|
| Series | Submersible Dewatering Pumps Tsurumi |
| Max Flow (GPM.) | 45 |
| Max Flow GPH | 2700 |
| TDH Maximum (Ft) | 40 |
| TDH Maximum (PSI) | 17 |
| Horse Power (HP) | 2/3 |
| Horsepower (IE .5, 1, 1.5, 20) | 0.67 |
| Outlet Connection Type | MNPT |
| Outlet (In.) | 0.75 |
| Wetted Materials | Cast Iron, PolyPro-GF |
| Elastomers / O-ring | Buna-Nitrile |
| Voltage (V) | 115 |
| Voltage (Range) | 110-120 |
| Phase (Ø) | Single (1) |
| Motor Frequency | 60 |
| Motor Amps (A) | 6.1 |
| Motor | Hermetically Sealed |
| Speed (RPM.) | 3450 |
| Max Operating Temperature (F) | 104 |
| Max Particle Size (In) | 0.24 |
| Viscosity | Milk 3.20 cp 40.00 ssu |
| Stages | 1 |
| Length (In.) | 12.5 |
| Mechanical Seal Face | SiC |
| Mechanical Seal Type | Double |
| Motor Bearings | Ball |
| Other | Max. Diameter (inch) : 9 1/8,Max. Height (inch): 14 3/16 , Continuous Running Water Level 0.04 inches. Seal Lubricant - Type : Turbine Oil (ISO VG32) or SAE 10W/20W. Double shielded, permanently lubricated, high-temp C3 with B-10 life of 60,000 hours. 1800 watts generator min. Starting current 12.5 |
| Impeller Material | Urethane rubber, semi-vortex |
| Cord Size | 16/3 |
| Cord Length (Ft.) | 32 |
| Duty | Continuous submerged or not. |
| Country of Manufacture | Japan |
| Weight (Lbs) | 34.000000 |
| Warranty (YRS.) | 2 |
| GPM Of Water At 10 Feet Of Head | 40 |
| GPM Of Water At 20 Feet Of Head | 31 |
| GPM Of Water At 30 Feet Of Head | 20 |
>
As a pioneer in the submersible pumps, Tsurumi Pump is contributing to the people all over the world by supplying the products that always support people’s lives such as submersible pumps for wastewater and construction, centrifugal pumps, vacuum pumps, and water treatment equipment, etc. and also by offering technologies that control and protect water.








