FatBoy Demand Pump
-
Manufacturer:
-
Product Name:FatBoy Demand Pump
-
Model Number:5538-1I1-69C
7GPM 100PSI 115V Demand NPT
Remco 5538-1I1-69C
THE PROFLO FATBOY® PUMPS UP THE VOLUME WITH 7GPM. Demanding industrial pump environments require precise engineering and quality componentsè. The ProFlo FatBoy® was designed with both. To maximize the potential of all five diaphragm chambers, Remco matched it with a high torque, completely sealed motor. For its size, it is one of the most powerful and productive diaphragm pumps you can buy, pumping up to 7.0 gallons per minute.
Demand pumps operated as a positive displacement pump which has a pressure switch built in. When flow is open the pump runs, when the discharge is closed or restricted to much the psi switch senses the set point and turns off the pump automatically. If your specifications call for low noise, smooth operation, continuous operation and high capacity, the Fat Boy will meet the challenge. Typical Applications heavy Duty Spraying, high Pressure Cleaning, agricultural Spraying, bulk Transfer, starter Fertilizer, de-icing, roof Cleaning. *Santoprene- FKM-based thermoplastic elastomer and is resistant to mild acids, some solvents and bases 7870-101E-SB
Uses such as snow melt liquid deicer deicing: Potassium Acetate, Sodium Formate, 32% Calcium Chloride, FAA Compliant Ice Melters, Peladowï®, LS25, LS-25 CI, and a variety of Environmentally Friendly products SnowMelt. Prewetting / anti-icing, salt pre-wetting systems, salt brine, calcium & Mag chloride, potassium acetate. Also used in prairie dog, ground squirrel burrow hole filling with sand water mixture.
| Model Number | 5538-1I1-69C |
|---|---|
| Max Flow (GPM.) | 7 |
| Max Flow GPH | 420 |
| TDH Maximum (Ft) | 238 |
| TDH Maximum (PSI) | 100 |
| Inlet Connection Type | FNPT |
| Inlet (In.) | 0.5 |
| Outlet Connection Type | FNPT |
| Outlet (In.) | 0.5 |
| Wetted Materials | PolyPro-GF |
| Elastomers / O-ring | FKM |
| Diaphragm | Santoprene |
| Voltage (V) | 115v |
| Voltage (Range) | 110-120 |
| Motor | TENV |
| Self Priming | Yes |
| Suction Lift (FT.) | 14 |
| Max Operating Temperature (F) | 140 |
| Viscosity | SAE 10 oil 88.00 cp 500.00 ssu |
| Mechanical Seal | No |
| Other | Pressure switch set at 100psi for demand applications. |
| Cord Size | 14/2 |
| Cord Length (Ft.) | 1 |
| Drain | No |
| Port Rotation | No |
| Country of Manufacture | United States |
| Weight (Lbs) | 11.000000 |
| Warranty (YRS.) | 1 |
>
Remco Professional Grade pumps.
Quality starts with our vision to produce fluid handling equipment that excels in performance and reliability, and surpasses the end user’s expectations.
Industry professionals choose Remco first because of our commitment to pro-level quality, engineering and customer service.
The Remco PowerRV Series provides a solution for every RV fluid pumping challenge, from potable water to gray and black water.
Electric diaphragm demand pumps for fluid handling applications such as purification, light industrial, food and beverage, agricultural, and automotive.
Available in 12VDC, 24VDC, 115VAC
