My Cart

EXPlosion proof Drum Pump Motor

Model Number
Standard SP-410EX EXPlosion proof Drum Pump Motor

Standard SP-410EX

EXPlosion proof Drum Pump Motor Hazardous Duty. Engineered for use hazardous duty locations. Ideally suited for transferring flammable/combustible liquids. Or for use in heavily corrosive environments or when aggressive fumes are present. Ideally suited for transferring concentrated acids and alkalies. 

Motor ONLY, pick suitable pump material and length from those shown seperately. Stainless pump must be used with flammable liquids.

ATEX Certification: II 2G Ex d IIA T4 FTZU 08 ATEX 0083

WARNING: Pumping of flammables or combustible liquids can generate a static electric discharge, causing fire or explosion resulting in injury or death. Read and understand operating instructions before starting this unit. Follow all federal, state and local safety codes including NFPA 30 - NFPA77. Prior to connecting to air supply, install bond and ground wires and check continuity of each wire. A meter reading of one ohm or less is required for safe liquid transfer. Use only metallic drum, receiving vessel and metallic pump (SP-SS) when pumping flammables. Air motors are not recognized under any current Underwriterç—´ Laboratory listing program. Consult a qualified engineer for suitability for use in a hazardous area or on flammables.

More Information
Model Number SP-410EX
Series Drum Pump Motors Electric Air
Horse Power (HP) 3/4
Horsepower (IE .5, 1, 1.5, 20) 0.7500
Watts 230.000000
Voltage (V) 115
Voltage (Range) 110-120
Phase (Ø) Single (1)
Motor Frequency 50/60
Motor EXP (C 1, Gp C/D & C11, Gp F/G)
Self Priming ----
Viscosity Vegetable Oil 34.60 cp 200.00 ssu
Mechanical Seal No
Other Not UL listed at this time. Is CE listed. Low voltage release. ATEX Certification: II 2G Ex d IIA T4 FTZU 08 ATEX 0083
Drain Yes
Port Rotation Yes
Country of Manufacture United States
Weight (Lbs) 25.000000
Warranty (YRS.) 3