Electric submersible High Flow
-
Model Number:
NK2-22L
-
Product Name:Electric submersible High Flow
-
Manufacturer:
-
Series (17 Models):
230v High Flow 2HP
Model Number
NK2-22L
$1,665.00
Tsurumi NK2-22L
Electric submersible Tsurumi . Dewatering pump - New high volume
NK2-22L series pump produces 35% more volume than our standard
NK2-22 series. Available in 220v single-phase only. Tsurumi
Submersible Pumps -Heavy duty, high head dewatering pump.
Designed for handling abrasive material with minimal wear. Rubber
wear plate is integral part of casing. Top discharge provides
maximum motor cooling efficiency allowing continuous duty operation
at low water levels and extended dry-run capability. Semi-vortex
ductile iron impeller.
32FT power cable.
- 230v with 32FT cord
- Urethane Semi Vortex Impeller maximum durably and maintaining pump performance.
- Double Inside Mechanical Seal with SiC faces, in 9oz oil bath provides the longest operation life.
- Oil Lifter provides lubrication of the seal faces.
- V-Ring Seal Protector protects mechanical seal from abrasive particles.
- Automatic thermal overload protecting, class B insulation Electric submersible Tsurumi pump motor.
- 2 Year warranty
| Model Number | NK2-22L |
|---|---|
| Series | Submersible Dewatering Pumps Tsurumi |
| Max Flow (GPM.) | 180 |
| Max Flow GPH | 10800 |
| TDH Maximum (Ft) | 60 |
| Horse Power (HP) | 3 |
| Horsepower (IE .5, 1, 1.5, 20) | 3.0000 |
| Outlet Connection Type | MNPT |
| Outlet (In.) | 3 |
| Wetted Materials | Aluminum, PolyPro-GF |
| Elastomers / O-ring | Buna-Nitrile |
| Voltage (V) | 230 |
| Voltage (Range) | 220-240 |
| Phase (Ø) | Single (1) |
| Motor Frequency | 60 |
| Motor Amps (A) | 11 |
| Motor | Hermetically Sealed |
| Speed (RPM.) | 3450 |
| Self Priming | Yes |
| Max Operating Temperature (F) | 130 |
| Viscosity | Milk 3.20 cp 40.00 ssu |
| Shaft | 416SS |
| Length (In.) | 24.500000 |
| Mechanical Seal Face | SiC |
| Mechanical Seal Type | Double |
| Motor Bearings | Ball |
| Other | Max. Diameter: 9 7/16" , Continuous Running Water Level (inch): 3 1/4". ETL Certified to UL CSA standards for submersible construction pumps. Double shielded, permanently lubricated, high-temp C3 with B-10 life of 60,000 hours. Min. generator size 8000 Watts. Pump weight 64LBS. PumpBiz has a wide assortment of level switches, pump control panels, hose and other accessories. |
| Impeller Material | Ductile Iron, semi-vortex |
| Motor Locked Rotor Amps (A.) | 70.000000 |
| Cord Size | 14-Mar |
| Cord Length (Ft.) | 32 |
| Motor Insulation | B |
| Duty | Continuous |
| Drain | Yes |
| Port Rotation | Yes |
| Country of Manufacture | Japan |
| Weight (Lbs) | 85.000000 |
| Warranty (YRS.) | 2 |
>
As a pioneer in the submersible pumps, Tsurumi Pump is contributing to the people all over the world by supplying the products that always support people’s lives such as submersible pumps for wastewater and construction, centrifugal pumps, vacuum pumps, and water treatment equipment, etc. and also by offering technologies that control and protect water.
You May Be Interested In
