My Cart

EGP Transfer Pump 12v

  • Model Number:


  • Product Name:
    EGP Transfer Pump 12v
  • Manufacturer:
Model Number
Graco 25T819 EGP Transfer Pump 12v Oil dc

Graco 25T819

Choose cost-saving convenience with the all-new Graco EGP electric pumps. Attach the EGP transfer pump directly to roll-around barrels for more mobility in more places. These pumps offer the same powerful, high-quality performance you’ve come to expect from Graco — only for less operating cost and more convenience. Oil, Hydraulic Fluid, Antifreeze, Petroleum- and synthetic-based oils (motor, gear and ATF), Waste oil, Cutting oils

Use the EGP Transfer Pump in locations where compressed air is unavailable or too cumbersome for short distance fluid transfer. 3.5GPM max.

  • Electrical Flexibility - Available in 12 VDC and 115 VAC power options.
  • Smooth Fluid Flow 8 gpm (30 lpm) - Output flow is continuous and non-pulsating up to 8 gpm (30 lpm).
  • Heavy-Duty Motor with Long Life - Industrial-grade electric motors with over-temperature protection on 115 VAC models.
  • Consistent Pressure - Built-in fluid bypass valve (65psi) protects pump and downstream components.
  • Pump Protection - Includes inlet strainer to keep larger debris out of pump housing and extend pump life.
  • Plug and Play - Self-priming, precision machined pump design.
  • Order suction tube and bung adapter seperately if needed.
  • For pumping non-flammable fluids, including motor oils, hydraulic fluid, and antifreeze. Do
    not use to pump water.
More Information
Model Number 25T819
Max Flow (GPM.) 3
Max Flow GPH 228
TDH Maximum (Ft) 150
TDH Maximum (PSI) 65
Horse Power (HP) 1/2
Inlet Connection Type FNPT
inlet size 1"
Outlet Connection Type FNPT
Outlet (In.) 3/4
Wetted Materials 304SS, Aluminum, Cast Iron
Elastomers / O-ring Buna-Nitrile
Voltage (V) 12vdc
Voltage (Range) 12/24/36 VDC
Motor Amps (A) 30
Motor TENV
Speed (RPM.) 1750
Self Priming Yes
Viscosity SAE 30 oil 352.00 cp 2000.00 ssu
Mechanical Seal No
Other Suction Kit 133375, Dispense Kit 133376, Bung Adapter 260061
Never allow the pump to operate dry. Make sure that the pump has fluid in it when the pump is initially installed. Do not run the pump for more than five (5) minutes with the pump discharge blocked.
Cord Size 10 AWG supply wire
Cord Length (Ft.) 0
Duty 30 min. ON / 30 min. OFF
Drain No
Weight (Lbs) 22.000000