Drum pump - SS-60 & air motor- SP-A2
-
Model Number:
A2 SS-60
-
Product Name:Drum pump - SS-60 & air motor- SP-A2
-
Manufacturer:
-
Series (61 Models):
Model Number
A2 SS-60
$2,585.70
Standard A2 SS-60
316SS Drum Pump Motor and Pump Combination. 60" Totes
Drum Pump Motor: High volume compressed air motor, operating pressure = 90 psi ( 6.32 bar) includes muffler, inlet = 3/8" 9.5 mm).
Drum Pump, High Volume. SS316 (stainless) construction, TFE guide sleeve, 60" ( 1500 mm) immersion. Made in USA
WARNING: Pumping of flammables or combustible liquids can generate a static electric discharge, causing fire or explosion resulting in injury or death. Read and understand operating instructions before starting this unit. Follow all federal, state and local safety codes including NFPA 30 - NFPA77. Prior to connecting to air supply, install bond and ground wires and check continuity of each wire. A meter reading of one ohm or less is required for safe liquid transfer. Use only metallic drum, receiving vessel and metallic pump (SP-SS) when pumping flammables.
| Model Number | A2 SS-60 |
|---|---|
| Series | Drum Pump & Motor 32gpm |
| Max Flow (GPM.) | 32 |
| Max Flow GPH | 1920 |
| TDH Maximum (Ft) | 36 |
| TDH Maximum (PSI) | 16 |
| Outlet Connection Type | Barb |
| Outlet (In.) | 1 |
| Wetted Materials | 316SS, Teflon |
| Elastomers / O-ring | Teflon-PTFE |
| Motor | Air-Pneumatic |
| Self Priming | ---- |
| Max Operating Temperature (F) | 80 |
| Viscosity | Glycerine 880.00 cp 5000.00 ssu |
| Shaft | 316SS |
| Length (In.) | 60.000000 |
| Mechanical Seal | No |
| Mechanical Seal Type | Single |
| Coupling | Y |
| Other | Engineered for use with flammable liquids or in hazardous environments. |
| Approvals | CARB, ETL, SSPMA |
| Pump Bearing | Rulon |
| Low Oil Shutdown | Yes |
| Impeller Material | plastic |
| Duty | Continouos |
| Drain | Yes |
| Port Rotation | Yes |
| Weight (Lbs) | 21.000000 |
| Warranty (YRS.) | 3 |
>
