Drum pump-SS-47 & air motor - SP-A1
-
Model Number:
A1 SS-47
-
Product Name:Drum pump-SS-47 & air motor - SP-A1
-
Manufacturer:
-
Series (61 Models):
Model Number
A1 SS-47
$1,202.00
Standard A1 SS-47
Drum Pump Stainless Motor and Pump Combination. Drum Pump - compressed air motor, operating pressure = 90 psi ( 6.3 bar), Includes muffler and inlet ball valve , 1/8" ( 3mm) inlet connection. RPM= 7500. Drum Pump, High Volume.
WARNING: Pumping of flammables or combustible liquids can generate a static electric discharge, causing fire or explosion resulting in injury or death. Read and understand operating instructions before starting this unit. Follow all federal, state and local safety codes including NFPA 30 - NFPA77. Prior to connecting to air supply, install bond and ground wires and check continuity of each wire. A meter reading of one ohm or less is required for safe liquid transfer. Use only metallic drum, receiving vessel and metallic pump (SP-SS) when pumping flammables.
| Model Number | A1 SS-47 |
|---|---|
| Series | Drum Pump & Motor 32gpm |
| Max Flow (GPM.) | 32 |
| Max Flow GPH | 1920 |
| TDH Maximum (Ft) | 36 |
| TDH Maximum (PSI) | 16 |
| Outlet Connection Type | Barb |
| Outlet (In.) | 1 |
| Wetted Materials | 316SS, Teflon |
| Elastomers / O-ring | Teflon-PTFE |
| Motor | Air-Pneumatic |
| Self Priming | ---- |
| Max Operating Temperature (F) | 190 |
| Viscosity | Glycerine 880.00 cp 5000.00 ssu |
| Shaft | 316SS |
| Length (In.) | 47.000000 |
| Mechanical Seal | No |
| Mechanical Seal Type | Double |
| Other | Engineered for use with flammable liquids or in hazardous environments. |
| Pump Bearing | Carbon |
| Drain | Yes |
| Port Rotation | Yes |
| Country of Manufacture | United States |
| Weight (Lbs) | 17.000000 |
| Warranty (YRS.) | 3 |
>
You May Be Interested In
