My Cart

Drum pump-SS-27 & air motor - SP-A1

Model Number
A1 SS-27
Standard A1 SS-27 Drum pump-SS-27  air motor - SP-A1

Standard A1 SS-27

Drum Pump Stainless, Air Motor and Pump Combination. Solvents flammables

Pump solvents, alcohol, ethanol and other hazardous chemicals from drums and barrels. Air motors are inherantly suitable for Explosion Proof motor applications.

Drum Pump - compressed air motor, operating pressure = 90 psi ( 6.3 bar), Includes muffler and inlet ball valve , 1/8" ( 3mm) inlet connection. RPM= 7500. Drum Pump, High Volume. SS316 construction, TFE guide sleeve.  

WARNING: Pumping of flammables or combustible liquids can generate a static electric discharge, causing fire or explosion resulting in injury or death. Read and understand operating instructions before starting this unit. Follow all federal, state and local safety codes including NFPA 30 - NFPA77. Prior to connecting to air supply, install bond and ground wires and check continuity of each wire. A meter reading of one ohm or less is required for safe liquid transfer. Use only metallic drum, receiving vessel and metallic pump (SP-SS) when pumping flammables. 


More Information
Model Number A1 SS-27
Series Drum Pump & Motor 32gpm
Max Flow (GPM.) 32
Max Flow GPH 1920
TDH Maximum (Ft) 36
TDH Maximum (PSI) 16
Outlet Connection Type Barb
Outlet (In.) 1
Wetted Materials 316SS, Teflon
Elastomers / O-ring Teflon-PTFE
Motor Air-Pneumatic
Self Priming ----
Max Operating Temperature (F) 175
Viscosity Glycerine 880.00 cp 5000.00 ssu
Shaft 316SS
Length (In.) 27.000000
Mechanical Seal No
Mechanical Seal Type Double
Other Engineered for use with flammable liquids or in hazardous environments.
Pump Bearing Carbon
Drain Yes
Port Rotation Yes
Country of Manufacture United States
Weight (Lbs) 13.000000
Warranty (YRS.) 3