My Cart

Dock Mount Aquasweep 3/4HP

  • Model Number:


  • Product Name:
    Dock Mount Aquasweep 3/4HP
  • Manufacturer:
3/4HP 115V
Model Number
Dock Mount Aquasweep

Scott Aerator 16234.1

Aquasweep pond lake circulator. Now you can keep your waterfront, dock area, ponds and canals free from floating algae, weeds and debris. The Scott Aquasweep (The original for over 20 yrs) DOCK model is designed to conveniently push un-sightly trash and organic debris to a location of choice for easy pick-up or simply away. High efficiency impeller moves 385gpm (23,100gph) over a 50Ft plume. It draws water from up to 10FT behind it. The Aquasweep is fully adjustable for various directional flows, and the stainless steel construction is both durable and long lasting, even in salt water! The design of the Aquasweep allows for adjustment due to tidal changes or water level variations due to weather conditions.

Like all of the products manufactured by Scott Aerator, the Aquasweep carries an un-conditional 5-year motor warranty and utilizes an environmentally friendly oil-free motor. Motor Specs: 60 HZ, Single Phase, 10 Amps, 680 Watts. Note 230 Volt Available*. GFCI required, please disconnect power source when swimmers present. Unlike simple cheap models, this one includes a SS cone over the impeller which extends out and directs the flow. With mud / muck gone the weeds stay away also.

Dramatically improve water quality while safely removing sediment buildup! Move the Muck! The Aquasweep dock mount model can keep your waterfront, dock area or canal clean from algae, trash and decaying debris on the surface, while also being fully adjustable to forcefully blast muck, silt, and decaying leaves off the bottom! The high velocity water propulsion of the Aquasweep forcefully pushes the bottom debris 50 feet or more, away from your swimming area and boat lift.

Fully Programmable Oscillator (optional accessory) Our fully programmable oscillator attachment makes moving muck even easier. No need to turn the AquaSweep in its mounting; the oscillator does it for you! We pre-program the oscillator to rotate the AquaSweep in 20 degree increments every 20 minutes; you set it for any radius you wish. Then plug it in and forget about it! The oscillator attachment can be added later, or to an existing Aquasweep too. Once your water front is cleaned up (often just hours) then you can use it on a as needed or infrequent basis.

Don’t be fooled by imitators, there are a lot of them out there! Compare with similar products and you’ll see why the Aquasweep by far surpasses anything else on the market in both performance and quality.: -The Aquasweep is oil free. The Thruster requires oil to be added and changed. Also, using the Aquasweep means no chance of disastrous oil leaks. -The Aquasweep runs at 3,450 rpms. The Thruster, even utilizing the 1 HP motor, runs at under 2,000 rpms. This amounts to the Aquasweep moving 400 gallons per minute compared to the Thruster 180 gallons per minute. -The Aquasweep is manufactured using American made stainless steel, even the motor. The Thruster utilizes galvanized metal. -The Aquasweep come standard with an un-conditional 5 year motor warranty. The Thruster, just 2 years. -The Aquasweep has been manufactured and marketed to blast muck and silt for over 18 years. The Thruster, just over 3 years.

More Information
Model Number 16234.1
Max Flow (GPM.) 450
Max Flow GPH 27000
Horse Power (HP) 3/4
Horsepower (IE .5, 1, 1.5, 20) 0.75000
Wetted Materials SS-Plastic
Voltage (V) 115
Voltage (Range) 110-120
Phase (Ø) Single (1)
Motor Frequency 60
Motor Amps (A) 7
Motor Hermetically Sealed
Speed (RPM.) 3450
Self Priming Yes
Viscosity Water 1.00 cp 31.00 ssu
Shaft 304SS
Motor Bearings Ball
Other Longer power cord available per foot. Cord includes marine grade 3 prong plug. *For power runs to the breaker box of over 160FT with 12GA wire you should use the 230v model. It is Easy to upgrade your line to 230v
Impeller Material Nylon, 2 blade
Cord Size 3-Dec
Cord Length (Ft.) 25
Duty Continuous
Drain Yes
Port Rotation Yes
Country of Manufacture United States
Weight (Lbs) 54.000000
Warranty (YRS.) 5