My Cart

Diesel transfer pump

Model Number
VR050-1022
$369.00
Jabsco VR050-1022 Diesel transfer pump

Jabsco VR050-1022

Jabsco rotary vane pump for transfer diesel fuel and other fuel oils. Designed for refueling small sizes diesel powered vehicles 50 gal. from drums. Suitable for mounting to the following equipment: Excavators, Cranes, Road rollers (compactors), Pavers, Agricultural machines, Generators, Helicopters.

Suitable for diesel fuel, Kerosene, Paraffin,Hydraulic oils, Oils up to 150 centiStokes (750Saybolt Universal) viscosity

  • Temperature Range: -30C to +50C (-22F to +104F)
  • Pump Body: Cast Iron
  • Rotor: Sintered Iron
  • Vanes: Sintered Bronze
  • Shaft: Carbon Steel
  • Seal: Nitrile Lip Seal
  • Ports: Vertical 3/4" BSP or 22m hose adapters (1")
  • Motor: 12V or 24V DC permanent magnet, corrosion resistant IP55 protected
  • Duty: Continuously rated up to 3 meters (10ft), total head fo diesel fuel at 40C (104F)
More Information
Model Number VR050-1022
Series Diesel Refuelling Pumps
Max Flow (GPM.) 13
Max Flow GPH 780
TDH Maximum (Ft) 33
TDH Maximum (PSI) 14
Horsepower (IE .5, 1, 1.5, 20) 0.1600
Inlet Connection Type Barb
inlet size Less than 1in
Inlet (In.) 0.98
Outlet Connection Type Barb
Outlet (In.) 0.98
Wetted Materials Aluminum, PPS-Ryton
Elastomers / O-ring Buna-Nitrile
Voltage (V) 12DC
Voltage (Range) 12/24/36 VDC
Motor TENV
Speed (RPM.) 1725
Self Priming Yes
Suction Lift (FT.) 6
Max Operating Temperature (F) 80
Viscosity SAE 10 oil 88.00 cp 500.00 ssu
Shaft Steel
Mechanical Seal LIP TYPE
Mechanical Seal Type Single
Coupling Y
Other 25 minute duty cycle. Suction strainer 300 micron recom. Do not run dry.

WARNING: Explosion hazard. Do not pump gasoline, solvents, thinners or other flammable liquids. To do so can cause an explosion resulting in injury or death.

Approvals CARB, ETL, SSPMA
Pump Bearing Rulon
Low Oil Shutdown Yes
Impeller Material plastic
Duty Continouos
Drain Yes
Port Rotation Yes
Weight (Lbs) 20.000000
Warranty (YRS.) 1
>